Auto Parts Search
We have info for following modifications of 2009 Mercury Sable
- 2009 Mercury Sable 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:W
- 2009 Mercury Sable Premier 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:W
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Mercury Sable AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Mercury Sable cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Mercury Sable 3.5 V6 GAS
- Remove center hub cap from wheel.
- Loosen hub nut.
- Raise and support vehicle.
- Remove front wheel and tire assembly.
- Remove hub nut and washer.
- Remove front brake anti-lock sensor harness from clip.
- Remove and position front brake anti-lock sensor aside.
- Remove and discard lower ball joint nut.
- Remove lower strut support nut and bolt. Discard nut.
- Using suitable tools, press ball joint stud until it is loose in knuckle.
- Wire knuckle to strut. This will prevent knuckle from falling off of strut while knuckle and lower ball joint are separated. Failure to follow these instructions may ...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Sable DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Mercury Sable AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Mercury Sable cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 Mercury Sable Premier 3.5 V6 GAS
- Remove center hub cap from wheel.
- Loosen hub nut.
- Raise and support vehicle.
- Remove front wheel and tire assembly.
- Remove hub nut and washer.
- Remove front brake anti-lock sensor harness from clip.
- Remove and position front brake anti-lock sensor aside.
- Remove and discard lower ball joint nut.
- Remove lower strut support nut and bolt. Discard nut.
- Using suitable tools, press ball joint stud until it is loose in knuckle.
- Wire knuckle to strut. This will prevent knuckle from falling off of strut while knuckle and lower ball joint are separated. Failure to follow these instructions may ...
CLICK HERE TO GET FULL ACCESS TO 2009 Mercury Sable DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Mercury Sable vehicle. |
Access the Complete guide! |