Auto Parts Search
We have info for following modifications of 2008 Ford Fusion
- 2008 Ford Fusion SEL 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2008 Ford Fusion SEL 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2008 Ford Fusion SE 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2008 Ford Fusion SE 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2008 Ford Fusion S 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford Fusion AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford Fusion cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Ford Fusion S 2.3 L4 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Fusion DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford Fusion AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford Fusion cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Ford Fusion SEL 3.0 V6 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Fusion DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford Fusion AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford Fusion cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Ford Fusion SE 2.3 L4 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Fusion DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford Fusion AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford Fusion cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Ford Fusion SEL 2.3 L4 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Fusion DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Ford Fusion AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Ford Fusion cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Ford Fusion SE 3.0 V6 GAS
- Remove front tire and wheel.
- Apply brake to keep halfshaft from rotating.
- Remove and discard front wheel hub nut.
- Remove front and rear lower control arm nuts.
- Using a suitable tool, disconnect 2 ball joints. Once pressure is applied to ball joint with a suitable tool, it may be necessary to tap wheel knuckle at ball joint area to separate ball joint from wheel knuckle.
- Using a suitable tool, separate halfshaft from wheel hub. When lower ball joint is separated from wheel knuckle, lower arm may strike outer constant velocity (CV) joint boot with enough force to damage boot cla...
CLICK HERE TO GET FULL ACCESS TO 2008 Ford Fusion DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Ford Fusion vehicle. |
Access the Complete guide! |