Auto Parts Search
We have info for following modifications of 2003 Mercury Sable
- 2003 Mercury Sable 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2003 Mercury Sable 3.0 V6 FLEX, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:2
- 2003 Mercury Sable 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:S
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Mercury Sable AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Mercury Sable cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Low Coolant Lamp ->
Vehicle: 2003 Mercury Sable 3.0 V6 GAS
The low coolant warning lamp should light whenever the coolant level in the coolant recovery bottle is 1/4 to 3/4 inch or more below the cold full mark. Raise coolant level in recovery bottle to the cold full mark to turn lamp off.
On models equipped with GEM module and low coolant level warning system, t...
CLICK HERE TO GET FULL ACCESS TO 2003 Mercury Sable MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Mercury Sable AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Mercury Sable cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Air Bag Warning Lamp ->
Vehicle: 2003 Mercury Sable 3.0 V6 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the Air B...
CLICK HERE TO GET FULL ACCESS TO 2003 Mercury Sable MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Mercury Sable AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Mercury Sable cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Low Oil Level Warning Indicator ->
Vehicle: 2003 Mercury Sable 3.0 V6 GAS
This system is used to indicate when the engine oil level is 11/2 quarts or more below the specified level. The lamp should light during engine starting. If the oil level is sufficient, the lamp will go off when the engine is operating. If the ...
CLICK HERE TO GET FULL ACCESS TO 2003 Mercury Sable MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Mercury Sable AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Mercury Sable cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Low Oil Level Warning Indicator ->
Vehicle: 2003 Mercury Sable 3.0 V6 FLEX
This system is used to indicate when the engine oil level is 11/2 quarts or more below the specified level. The lamp should light during engine starting. If the oil level is sufficient, the lamp will go off when the engine is operating. If the ...
CLICK HERE TO GET FULL ACCESS TO 2003 Mercury Sable MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Mercury Sable AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Mercury Sable cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Traction Control System Warning Lamp ->
Vehicle: 2003 Mercury Sable 3.0 V6 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...
CLICK HERE TO GET FULL ACCESS TO 2003 Mercury Sable MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2003 Mercury Sable AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2003 Mercury Sable cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Powertrain Malfunction Indicator ->
Vehicle: 2003 Mercury Sable 3.0 V6 FLEX
This lamp should light when the ignition is turned On. After engine starts, the lamp should go off, unless a fault condition is detected in the powertrain system. If the lamp remains On a diagnostic trouble code is stored in the PCM. Following diagnosis and repair, the Powertrain Malfunction Indicator will automatically reset when stored diagnostic trouble codes are cleared from PCM memory. The PCM reset procedure allows the scan tool to command the PCM to clear all diagnostic trouble codes.
CLICK HERE TO GET FULL ACCESS TO 2003 Mercury Sable MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2003 Mercury Sable vehicle. |
Access the Complete guide! |