2006 Chevrolet Cobalt Brake Service (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Chevrolet Cobalt car and truck repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 2006 Chevrolet Cobalt automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 2006 Chevrolet Cobalt

  • 2006 Chevrolet Cobalt SS 2.0 L4 GAS, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:P
  • 2006 Chevrolet Cobalt SS 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:B
  • 2006 Chevrolet Cobalt LTZ 2.2 L4 GAS, CC:2189, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
  • 2006 Chevrolet Cobalt LS 2.2 L4 GAS, CC:2189, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
  • 2006 Chevrolet Cobalt LT 2.2 L4 GAS, CC:2189, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F

BRAKE SERVICE PROCEDURES FOR 2006 Chevrolet Cobalt AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Chevrolet Cobalt cars and light trucks from 1990+.

Hydraulic Brake Systems -> Description -> Brake Distribution Valve & Switch -> Brake Warning Lamp Switches -> Combination Valve -> Components -> Diagonally Split System -> Failure Warning Switch -> Fluid Level Sensor -> Front & Rear Split System -> Metering Valve -> Proportioning Or Pressure Control Valve -> Warning Lamp
Vehicle: 2006 Chevrolet Cobalt LT 2.2 L4 GAS

Front & Rear Split System

When the brake pedal is depressed, both the primary (front brake) and the secondary (rear brake) master cylinder pistons are moved simultaneously to exert hydraulic fluid pressure on their respective systems.

If the rear brake system fails, initial brake pedal movement will cause the unrestricted secondary piston to bottom in the master cylinder bore. Primary piston movement will displace hydraulic fluid in the primary section of the master cylinder to actuate the front brake system.

If the front brake system fails, initial brake pedal movement will cause the ...

CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Cobalt BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 2006 Chevrolet Cobalt AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Chevrolet Cobalt cars and light trucks from 1990+.

Power Brake Units -> Description -> AC-Delco Tandem Diaphragm Type -> Toyota/GM Single Diaphragm Type
Vehicle: 2006 Chevrolet Cobalt SS 2.0 L4 GAS

AC-Delco Tandem Diaphragm Type

This unit utilizes a vacuum power chamber, consisting of a front and rear shell, housing divider, front and rear diaphragm, plate assemblies, hydraulic pushrod and a diaphragm return spring, Fig. .

In normal operating mode, with service brakes in released position, the booster operates with vacuum on both sides of its diaphragms. When brakes are applied, air at atmospheric pressure is admitted to one side of each diaphragm to provide power assist. When the service brake is released, atmospheric air is shut off f...

CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Cobalt BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 2006 Chevrolet Cobalt AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Chevrolet Cobalt cars and light trucks from 1990+.

Anti-Lock Brakes -> Delco/Bosch Type 7.4 -> Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Connector Pin Identification -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Intermittent Fault Conditions -> Less Scan Tool -> With Scan Tool
Vehicle: 2006 Chevrolet Cobalt SS 2.0 L4 GAS

Accessing Diagnostic Trouble Codes

Connect a suitably programmed scan tool to the Data Link Connector (DLC), and follow manufacturer's instructions.

Diagnostic Trouble Code Interpretation

[[table data]]

Connector Pin Identification

When performing ABS system diagnosis and testing, refer to connector pin identification, Fig. .

Diagnostic Tests

[[table data]]

Clearing Diagnostic Trouble Codes

Less Scan Tool

Current diagnostic trouble codes are cleared every time the ignition is turned off. To clear Malf History (Past Diagnostic Trouble Codes), select "Clear Codes" function on the scan tool. Past diagnostic trouble c...

CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Cobalt BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 2006 Chevrolet Cobalt AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Chevrolet Cobalt cars and light trucks from 1990+.

Drum Brakes -> Cavalier, Cobalt, G5 & Sunfire -> Inspection -> Adjuster Mechanism -> Backing Plate -> Brake Drums -> Brake Linings & Springs -> Parking Brake Cable
Vehicle: 2006 Chevrolet Cobalt LS 2.2 L4 GAS

  • Inspect components for damage or wear. Replace as required.
  • Inspect wheel cylinder boots for tears, cuts or heat damage. Replace as required.
  • Remove wheel cylinder links. If fluid spills from boot center hole, replace wheel cylinder.
  • Light fluid coatings on piston within cylinder is considered normal.
  • Inspect backing plate for evidence of axle seal leakage. If leakage exists, replace axle seal.
  • Inspect backing plate mounting bolts and ensure they are tight.
  • Clean rust and dirt from shoe contact surface on backing plate using fine emery cloth or other suitable abrasive.

Brake Drums

Any time t...

CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Cobalt BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 2006 Chevrolet Cobalt AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Chevrolet Cobalt cars and light trucks from 1990+.

Hydraulic Brake Systems -> Description -> Brake Distribution Valve & Switch -> Brake Warning Lamp Switches -> Combination Valve -> Components -> Diagonally Split System -> Failure Warning Switch -> Fluid Level Sensor -> Front & Rear Split System -> Metering Valve -> Proportioning Or Pressure Control Valve -> Warning Lamp
Vehicle: 2006 Chevrolet Cobalt LS 2.2 L4 GAS

Front & Rear Split System

When the brake pedal is depressed, both the primary (front brake) and the secondary (rear brake) master cylinder pistons are moved simultaneously to exert hydraulic fluid pressure on their respective systems.

If the rear brake system fails, initial brake pedal movement will cause the unrestricted secondary piston to bottom in the master cylinder bore. Primary piston movement will displace hydraulic fluid in the primary section of the master cylinder to actuate the front brake system.

If the front brake system fails, initial brake pedal movement will cause the ...

CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Cobalt BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 2006 Chevrolet Cobalt AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Chevrolet Cobalt cars and light trucks from 1990+.

Drum Brakes -> Cavalier, Cobalt, G5 & Sunfire -> Inspection -> Adjuster Mechanism -> Backing Plate -> Brake Drums -> Brake Linings & Springs -> Parking Brake Cable
Vehicle: 2006 Chevrolet Cobalt LT 2.2 L4 GAS

  • Inspect components for damage or wear. Replace as required.
  • Inspect wheel cylinder boots for tears, cuts or heat damage. Replace as required.
  • Remove wheel cylinder links. If fluid spills from boot center hole, replace wheel cylinder.
  • Light fluid coatings on piston within cylinder is considered normal.
  • Inspect backing plate for evidence of axle seal leakage. If leakage exists, replace axle seal.
  • Inspect backing plate mounting bolts and ensure they are tight.
  • Clean rust and dirt from shoe contact surface on backing plate using fine emery cloth or other suitable abrasive.

Brake Drums

Any time t...

CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Cobalt BRAKE SERVICE PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Chevrolet Cobalt vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find