Auto Parts Search
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Pontiac GTO AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Pontiac GTO cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2005 Pontiac GTO 6.0 V8 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2005 Pontiac GTO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Pontiac GTO AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Pontiac GTO cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Pontiac GTO 6.0 V8 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2005 Pontiac GTO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Pontiac GTO AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Pontiac GTO cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2005 Pontiac GTO 6.0 V8 GAS
- Raise and support vehicle on a hoist.
- Remove tire and wheel assembly.
- Disconnect tie rod from knuckle.
- Insert a drift into rotor and against caliper in order to prevent rotor from turning.
- Remove wheel drive shaft nut.
- Remove stabilizer link.
- Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after disconnecting electrical connector from sensor. Disconnect ele...
CLICK HERE TO GET FULL ACCESS TO 2005 Pontiac GTO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Pontiac GTO vehicle. |
Access the Complete guide! |