Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Mercury Grand Marquis car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Mercury Grand Marquis automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2005 Mercury Grand Marquis AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Mercury Grand Marquis cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Parking Brake Service -> Crown Victoria, Grand Marquis, Marauder & Town Car -> Parking Brake Linings, Replace
Vehicle: 2005 Mercury Grand Marquis 4.6 V8 GAS
Parking Brake Linings, Replace
Crown Victoria, Grand Marquis, Marauder & Town Car
- Remove tire and wheel assembly.
- Remove brake rotor.
- Remove spring and brake shoe adjusting screw.
- Remove brake shoe hold down springs.
- Remove parking bake shoe and linings.
- Reverse procedure to install noting the following:
- Lubricat...
CLICK HERE TO GET FULL ACCESS TO 2005 Mercury Grand Marquis BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Mercury Grand Marquis AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Mercury Grand Marquis cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Inspection
Vehicle: 2005 Mercury Grand Marquis 4.6 V8 GAS
Remove wheels and inspect brake disc, caliper and linings. Inspect wheel bearings and repack if required.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
If caliper is removed when installing new components, clean all components in alcohol, then wipe dry using lint-free cloths. Blow out drilled passages and bores with compressed air. Inspect dust boots for punctures or tears, replace as required.
Inspect piston bores in both housings for scoring or pitting. Bores showing light scratches or corrosion can be cleaned with crocus clo...
CLICK HERE TO GET FULL ACCESS TO 2005 Mercury Grand Marquis BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Mercury Grand Marquis AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Mercury Grand Marquis cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Brake Disc Service
Vehicle: 2005 Mercury Grand Marquis 4.6 V8 GAS
Disc brake service is critical because of the close tolerances required in machining the brake disc to ensure proper brake operation.
Maintaining close control of the shape of the rubbing surfaces is required to prevent brake roughness. In addition, the surface finish must be non-directional and maintained at a micro-inch finish. This is required to avoid pulls and erratic performance and promote long lining life and equal lining wear of both the lefthand and righthand brakes.
Do not attempt to refinish the rubbing surfaces unless precision equip...
CLICK HERE TO GET FULL ACCESS TO 2005 Mercury Grand Marquis BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Mercury Grand Marquis AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Mercury Grand Marquis cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake System Bleed -> System Priming -> Wheel Bleeding Sequence
Vehicle: 2005 Mercury Grand Marquis 4.6 V8 GAS
Pressure bleeding is recommended for all hydraulic disc brake systems.
Do not reuse brake fluid drained from the hydraulic system when bleeding the brakes. Ensure disc brake pistons are returned to their normal positions and the shoe and lining assemblies are properly seated.
Do not shake the pressure bleeder tank while air is being added or after it has been pressurized. This will prevent air from the tank getting into the lines. Do not move the tank during the bleeding operation. The tank should be kept at least one third full.
On models equipped with power brakes, exhaust the...
CLICK HERE TO GET FULL ACCESS TO 2005 Mercury Grand Marquis BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Mercury Grand Marquis AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Mercury Grand Marquis cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Crown Victoria, Grand Marquis, Marauder, Mustang & Town Car -> Five Hundred, Freestyle, Montego, Sable & Taurus -> Focus -> Fusion, Milan, MKZ & Zephyr -> Installation -> LS & Thunderbird -> Master Cylinder -> Removal -> Wheel Cylinders
Vehicle: 2005 Mercury Grand Marquis 4.6 V8 GAS
Master Cylinder
Crown Victoria, Grand Marquis, Marauder, Mustang & Town Car
- Depress brake pedal several times to exhaust system vacuum.
- Disconnect master cylinder brake lines and electrical connectors.
- Disconnect hydraulic control unit supply hose at master cylinder. Secure hose aside.
- Remove two mounting bolts, then secure proportioning valve and tubes aside.
- Remove mounting nuts and master cylinder.
- Reverse procedure to install.
Focus
- Disconnect electrical connector and remove filler cap.
- Raise and support vehicle, remove front tire and wheel assemblies.
- Drain brake fluid into suit...
CLICK HERE TO GET FULL ACCESS TO 2005 Mercury Grand Marquis BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Mercury Grand Marquis AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Mercury Grand Marquis cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Rotor, Replace -> Installation -> Removal
Vehicle: 2005 Mercury Grand Marquis 4.6 V8 GAS
This procedure has been revised by a Technical Service Bulletin.
On Sable and Taurus models, the disc rotor is a hat section-type of composite steel and cast iron. A Rotunda Rotor Mounting Adapter tool No. 054-00032, or equivalent, is required for use on the brake lathe for refinishing. Failure to use the adapter will result in gouging the brake disc, making it unfit for use.
On Sable and Taurus models, if service is required, install the new full cast front disc rotors, part No. F10Y-1125-B, in pairs only. Never install a full cast rotor on one side of the vehicle with a composite...
CLICK HERE TO GET FULL ACCESS TO 2005 Mercury Grand Marquis BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Mercury Grand Marquis vehicle.
|
| Access the Complete guide! |
