Auto Parts Search
We have info for following modifications of 2005 Chrysler PT Cruiser
- 2005 Chrysler PT Cruiser 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:B
- 2005 Chrysler PT Cruiser 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 2005 Chrysler PT Cruiser 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:G
- 2005 Chrysler PT Cruiser 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:S
- 2005 Chrysler PT Cruiser 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:E
- 2005 Chrysler PT Cruiser 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:8
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chrysler PT Cruiser AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chrysler PT Cruiser cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2005 Chrysler PT Cruiser 2.4 L4 GAS
Remove
- Disconnect negative battery cable.
- Place transaxle in gated park.
- Raise vehicle on hoist.
- Remove wheel and tire assembly.
- Remove cotter pin, nut lock, spring washer and hub nut from end of outer C/V joint stub axle.
- On models equipped with ABS, disconnect front wheel speed sensor and secure harness out of the way.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying down on lower control arm. Use caution when separating ball joint stud from steering knuckle, so ball joint seal does not get damaged.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler PT Cruiser DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chrysler PT Cruiser AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chrysler PT Cruiser cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2005 Chrysler PT Cruiser 2.4 L4 GAS
Remove
- Disconnect negative battery cable.
- Place transaxle in gated park.
- Raise vehicle on hoist.
- Remove wheel and tire assembly.
- Remove cotter pin, nut lock, spring washer and hub nut from end of outer C/V joint stub axle.
- On models equipped with ABS, disconnect front wheel speed sensor and secure harness out of the way.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying down on lower control arm. Use caution when separating ball joint stud from steering knuckle, so ball joint seal does not get damaged.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler PT Cruiser DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chrysler PT Cruiser AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chrysler PT Cruiser cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2005 Chrysler PT Cruiser 2.4 L4 GAS
Remove
- Disconnect negative battery cable.
- Place transaxle in gated park.
- Raise vehicle on hoist.
- Remove wheel and tire assembly.
- Remove cotter pin, nut lock, spring washer and hub nut from end of outer C/V joint stub axle.
- On models equipped with ABS, disconnect front wheel speed sensor and secure harness out of the way.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying down on lower control arm. Use caution when separating ball joint stud from steering knuckle, so ball joint seal does not get damaged.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler PT Cruiser DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chrysler PT Cruiser AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chrysler PT Cruiser cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2005 Chrysler PT Cruiser 2.4 L4 GAS
Remove
- Disconnect negative battery cable.
- Place transaxle in gated park.
- Raise vehicle on hoist.
- Remove wheel and tire assembly.
- Remove cotter pin, nut lock, spring washer and hub nut from end of outer C/V joint stub axle.
- On models equipped with ABS, disconnect front wheel speed sensor and secure harness out of the way.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying down on lower control arm. Use caution when separating ball joint stud from steering knuckle, so ball joint seal does not get damaged.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler PT Cruiser DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chrysler PT Cruiser AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chrysler PT Cruiser cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2005 Chrysler PT Cruiser 2.4 L4 GAS
Remove
- Disconnect negative battery cable.
- Place transaxle in gated park.
- Raise vehicle on hoist.
- Remove wheel and tire assembly.
- Remove cotter pin, nut lock, spring washer and hub nut from end of outer C/V joint stub axle.
- On models equipped with ABS, disconnect front wheel speed sensor and secure harness out of the way.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying down on lower control arm. Use caution when separating ball joint stud from steering knuckle, so ball joint seal does not get damaged.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler PT Cruiser DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chrysler PT Cruiser AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chrysler PT Cruiser cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2005 Chrysler PT Cruiser 2.4 L4 GAS
Remove
- Disconnect negative battery cable.
- Place transaxle in gated park.
- Raise vehicle on hoist.
- Remove wheel and tire assembly.
- Remove cotter pin, nut lock, spring washer and hub nut from end of outer C/V joint stub axle.
- On models equipped with ABS, disconnect front wheel speed sensor and secure harness out of the way.
- Remove nut and bolt retaining ball joint stud into steering knuckle.
- Separate ball joint stud from steering knuckle by prying down on lower control arm. Use caution when separating ball joint stud from steering knuckle, so ball joint seal does not get damaged.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2005 Chrysler PT Cruiser DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Chrysler PT Cruiser vehicle. |
Access the Complete guide! |