Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 2000 Hyundai Tiburon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Hyundai Tiburon cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1997-98 -> 1999-2002 -> Accent -> Brake System Bleed -> Component Replacement -> Elantra, Sonata & Tiburon -> Electronic Control Unit (ECU) -> Front Wheel Sensors -> Hydraulic Control Unit (HCU) -> Modulator -> Rear Wheel Sensors
Vehicle: 2000 Hyundai Tiburon 2.0 L4 GAS
Brake System Bleed
- Bleed normal brake circuit using standard procedure as outlined in "Hydraulic Brake Service."
- Turn ignition switch Off, then connect MUT to diagnosis connector.
- Turn ignition switch to On position, but do not start engine. Multi-use tester should now be On.
- Follow each of the steps listed in Fig. for each bleed screw in order shown:
- Place a clear plastic bleeder tube on screw to be bled.
- Apply light and constant pressure to brake pedal.
- Use multi-use tester to actuate appropriate valve. As valve cycles, fluid and/or air will emerge from bleed screw and brake pedal will...
CLICK HERE TO GET FULL ACCESS TO 2000 Hyundai Tiburon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Hyundai Tiburon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Hyundai Tiburon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake Specifications
Vehicle: 2000 Hyundai Tiburon 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Hyundai Tiburon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Hyundai Tiburon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Hyundai Tiburon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder
Vehicle: 2000 Hyundai Tiburon 2.0 L4 GAS
Master Cylinder
- Disconnect electrical connector from fluid level switch, if equipped, Figs. through .
- Disconnect brake lines from master cylinder and plug open ports.
- Remove master cylinder mounting nuts, then remove ma...
CLICK HERE TO GET FULL ACCESS TO 2000 Hyundai Tiburon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Hyundai Tiburon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Hyundai Tiburon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Less Anti-Lock Brakes -> With Anti-Lock Brakes
Vehicle: 2000 Hyundai Tiburon 2.0 L4 GAS
Less Anti-Lock Brakes
- Fill master cylinder reservoir with brake fluid.
- Using a suitable length and diameter of vinyl hose, insert end of hose into a container full of brake fluid.
- Secure other end of hose to wheel cylinder bleeder plug farthest from master cylinder.
- An assistant should depress brake pedal slowly several times, ...
CLICK HERE TO GET FULL ACCESS TO 2000 Hyundai Tiburon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Hyundai Tiburon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Hyundai Tiburon cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Accent, Elantra, Sonata & Tiburon -> Inspection -> Installation -> Removal -> Santa Fe
Vehicle: 2000 Hyundai Tiburon 2.0 L4 GAS
Removal
Accent, Elantra, Sonata & Tiburon
- Raise and support vehicle, then remove wheel/tire assembly.
- On Accent, Elantra and Tiburon models, remove axle nut, then the hub and drum assembly, Fig. .
- On Sonata models, remove brake drum. If drum is difficult to remove, screw in bolts to pull drum out, Figs. and .
- On all models, remove end shoe springs, cylinder and hold-down spring.
- Remove shoes and adjuster as an assembly.
Santa Fe
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove brake drum Fig. .
- Remove brake shoe hold-down spring and strut.
- Remove brake shoe return springs...
CLICK HERE TO GET FULL ACCESS TO 2000 Hyundai Tiburon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Hyundai Tiburon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Hyundai Tiburon cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting -> Preliminary Inspection -> System Diagnosis Step Indicator Check
Vehicle: 2000 Hyundai Tiburon 2.0 L4 GAS
Preliminary Inspection
Start engine and drive at a speed of 3-6 mph, then verify that the modulator is operating by listening for motor pump hum and solenoid clicking for one or two seconds. Procedure should be performed within first three minutes after start up. Solenoid valve and motor pum...
CLICK HERE TO GET FULL ACCESS TO 2000 Hyundai Tiburon BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Hyundai Tiburon vehicle. |
Access the Complete guide! |