2000 Ford E-250 Econoline REPAIR MANUAL -- HOW TO FIX YOUR CAR OR TRUCK

Auto Parts Search


2000 Ford E-250 Econoline CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Ford REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

Help me findSearch

Select Section

Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Ford E-250 Econoline car and truck repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Ford E-250 Econoline automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >
Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Ford mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 2000 Ford E-250 Econoline vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

A/C & HEATER SERVICE PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Cooling System Bleed -> 1998 -> 1999-2000 -> Except Excursion, Explorer & Villager -> Excursion -> Explorer -> Villager
Vehicle: 2000 Ford E-250 Econoline 5.4 V8 GAS

Except Excursion, Explorer & Villager
  • Select maximum heater temperature and blower motor speed settings.
  • Position control to discharge air at A/C vents in instrument panel.
  • Start engine and allow to idle, while engine is idling, feel for hot air at A/C vents.
  • If air discharge remains cool and engine coolant temperature gauge does not move, engine coolant level is low and must be filled.
  • Start engine and allow to idle until normal operating temperature is reached. Hot air should discharge from A/C vents and engine coolant temperature gau...

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline A/C & HEATER SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

Anti-lock Brakes -> E-Series, Excursion, Expedition, Explorer, F-150/250LD, F-Super Duty Mountaineer, Navigator & Ranger (4WABS) -> Diagnosis & Testing -> 1997 -> 1997 E-Series -> 1997 Expedition -> 1997 Explorer -> 1997 F-150 -> 1997 Mountaineer -> 1997 Navigator -> 1997 Ranger -> 1997F-250LD -> 1998 E-Series -> 1998 Expedition -> 1998 Explorer -> 1998 F-150 -> 1998 F-250LD -> 1998 Mountaineer -> 1998 Navigator -> 1998 Ranger -> 1999 E-Series -> 1999 Expedition -> 1999 Explorer -> 1999 F-150 -> 1999 F-250LD -> 1999 Mountaineer -> 1999 Navigator -> 1999 Ranger -> 2000 E-Series -> 2000 Expedition -> 2000 Explorer -> 2000 F-150 -> 2000 Mountaineer -> 2000 Navigator -> 2000 Ranger -> 2001 E-Series -> 2001 Expedition -> 2001 Explorer -> 2001 F-150 -> 2001 Mountaineer -> 2001 Navigator -> 2001 Ranger -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Drive Cycle Tests -> Excursion -> Explorer & Mountaineer -> F-Super Duty Series -> F-Super Duty Series & Excursion -> Intermittent Diagnosis -> Quick Check -> Ranger -> System Pre-Check -> Wiring Diagrams
Vehicle: 2000 Ford E-250 Econoline 5.4 V8 GAS

Accessing Diagnostic Trouble Codes

  • Connect New Generation STAR (NGS) Tester to Data Link Connector (DLC) located beneath instrument panel.
  • Select vehicle to be tested from NGS menu.
  • If NGS does not communicate with vehicle, proceed as follows:
    • Ensure program card is properly installed.
    • Inspect connections to vehicle.
    • Ensure ignition is in On position.
    • If NGS still does not communicate with vehicle, refer to NGS Tester manual.
  • Follow NGS Tester instructions to retrieve DTC's.

Diagnostic Trouble Code Interpretation

Refer to Figs. through for diagnostic trouble code interpretation.

Wiri...

[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]
[[table data]]

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline BRAKE SERVICE PROCEDURES

FUEL FILTER REPLACEMENT PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

Ford Motor Co. Light Trucks, SUVs & Vans -> Fuel Shutoff Switch Location -> 1991-06 Econoline
Vehicle: 2000 Ford E-250 Econoline 4.2 V6 GAS

The inertia switch is ...

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline FUEL FILTER REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2000 Ford E-250 Econoline 5.4 V8 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

Starter, Replace
Vehicle: 2000 Ford E-250 Econoline 5.4 V8 GAS

  • Disconnect battery ground cable.
  • Raise and support vehicle.
  • When disconnecting hardshell connector at starter motor solenoid S-terminal, grasp plastic shell and pull off. Do not pull on wires.
  • Pull straight off to prevent damage to connector and S-terminal.
  • Replace damaged components, if required.
  • Remove starter moto...

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline STARTER & ALTERNATOR REPLACEMENT PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

Ford Motor Co. Trucks -> Traction Control System Warning Lamp ->
Vehicle: 2000 Ford E-250 Econoline 5.4 V8 GAS

This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline MAINTENANCE LAMP RESET PROCEDURES

RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2000 Ford E-250 Econoline 5.4 V8 GAS

Inlet

  • Drain cooling system into a suitable container.
  • Reposition heater core inlet hose clamp at engine.
  • Remove hose from engine.
  • Reposition heater hose inlet clamp at heater core.
  • Remove heater inlet hose from heater core.
  • Remove hose from vehicle.
  • Reverse procedure to in...

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline RADIATOR & HOSE REPLACEMENT PROCEDURES

SERPENTINE BELT SERVICE PROCEDURES FOR 2000 Ford E-250 Econoline AUTOMOBILES

Serpentine Drive Belt, Replace
Vehicle: 2000 Ford E-250 Econoline 4.2 V6 GAS

  • Use drive belt tensioner pulley bolt to rotate drive belt tensioner counterclockwise and remove drive...

CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline SERPENTINE BELT SERVICE PROCEDURES

COMPONENT LOCATION DIAGRAMS FOR 2000 Ford E-250 Econoline AUTOMOBILES

Component location diagrams for most 2000 Ford E-250 Econoline cars and light trucks sold in the U.S. from 1990+.

Transmission Diagram for 2000 Ford E-250 Econoline  5.4 V8 GASTransmission Diagram for 2000 Ford E-250 Econoline 5.4 V8 GAS

Components on diagram:
  • Vehicle Speed Sensor
  • Turbine Shaft Speed Sensor
  • Output Shaft Speed Sensor
  • Digital Transmission Range Sensor
  • Connector C-106
  • CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 2000 Ford E-250 Econoline AUTOMOBILES

    OEM drawn wiring diagrams for most 2000 Ford E-250 Econoline cars and light trucks sold in the U.S.

    2000 Ford E-250 Econoline  4.2 V6 GAS Wiring Diagram2000 Ford E-250 Econoline 4.2 V6 GAS Wiring Diagram

    Components on diagram:
  • Powertrain Control Module
  • Digital Transmission Range Sensor
  • 2000 Ford E-250 Econoline  5.4 V8 GAS Wiring Diagram2000 Ford E-250 Econoline 5.4 V8 GAS Wiring Diagram

    Components on diagram:
  • Blend Door Actuator
  • Function Selector Switch
  • Temp Control Switch
  • CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 2000 Ford E-250 Econoline AUTOMOBILES

    OEM TSB listings for most 2000 Ford E-250 Econoline cars and light trucks sold in the U.S. from 1985+.

    Document: SAFETY RECALL - SPEED CONTROL SYSTEM MODIFICATION
    Vehicle: 2000 Ford E-250 Econoline 4.2 V6 GAS

    Auto Systems:
  • Instruments, Dash Cluster, Warning Lights, Mirrors
  • Document: RECALL - FUSED JUMPER HARNESS REPLACEMENT FOR VEHICLES SERVICED WITH AN INCOMPATIBLE FUSED JUMPER HARNESS
    Vehicle: 2000 Ford E-250 Econoline 4.2 V6 GAS

    Auto Systems:
  • Chassis Electrical, Wiring, Fuses & Breakers, Wipers, Motors
  • CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 2000 Ford E-250 Econoline AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2000 Ford E-250 Econoline cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2000 Ford E-250 Econoline cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2000 Ford E-250 Econoline cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2000 Ford E-250 Econoline cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 2000 Ford E-250 Econoline SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details about 1996 Ford E-250 Econoline Exhaust Manifold, Passenger Side1996 Ford E-250 Econoline Exhaust Manifold, Passenger Side, <b>50-state legal</b>; Cast iron construction; With wrap around heat shield; A high quality, direct fit OE replacement exhaust manifold; Made with durable, heat controlling materials for long-lasting life..

    Source: Auto Body Parts Store

    $53.47

    Click here to view more details about 1991 Ford E-250 Econoline Headlight Door, Driver Side1991 Ford E-250 Econoline Headlight Door, Driver Side, Single type; With parking light hole; Made of high impact polymer for extra strength and durability; Built to exact factory specification for a precise fit; Enhances the looks of your vehicle; Backed by 1-year, unlimited-mileage warranty..

    Source: Auto Body Parts Store

    $6.15

    Click here to view more details about 2009 Ford Mustang 18" x 8.5" Alloy Wheel2009 Ford Mustang 18" x 8.5" Alloy Wheel, Alloy Wheel; 18 X 8.5; 5 Spokes; 5 Lug; 4.5 Inch BP; ONE Step Flange Type; Polished, , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $201.50

    Click here to view more details about 1986 Ford E-250 Econoline Super V8, 5 L, 302 CID Rebuilt Engine1986 Ford E-250 Econoline Super V8, 5 L, 302 CID Rebuilt Engine, Crank #2MAE or R1J, Smog not HO., Warranty: 3-Year/100,000 Mile, .

    Source: Rebuilt Engines Store

    $1,297.00

    Click here to view more details2005 Ford E-250 Econoline Used Ignition Switch W/Key, **W/ KEY** (ELECT SWITCH ONLY), Very Good.

    Source: Used Auto Parts Store

    $75.00

    Click here to view more details2000 Ford E-250 Econoline Used Header Panel, White BARE CK COND, Very Good.

    Source: Used Auto Parts Store

    $76.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Ford E-250 Econoline vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    Auto Repair Quick Search
    Help me find