Auto Parts Search
We have info for following modifications of 1999 Mitsubishi Montero Sport
- 1999 Mitsubishi Montero Sport 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215
- 1999 Mitsubishi Montero Sport 2.4 L4 GAS, CC:2351, Fuel Injection
- 1999 Mitsubishi Montero Sport 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Mitsubishi Montero Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Mitsubishi Montero Sport cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1999 Mitsubishi Montero Sport 3.0 V6 GAS
Front
Do not strike ABS rotors or outer race of driveshaft against other parts when removing or installing driveshaft. Use care not to strike pole piece at tip of front wheel speed sensor with tools when servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove front engine undercover bolts then undercover.
- Remove wheel nuts and front wheels.
- Drain gear oil into a suitable container.
- Remove wheel hub cap, snap ring, and shim. Do not apply pressure to wheel bearing from vehicle weight to avoid possible damage when driveshaft nut i...
CLICK HERE TO GET FULL ACCESS TO 1999 Mitsubishi Montero Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Mitsubishi Montero Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Mitsubishi Montero Sport cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Rear
Vehicle: 1999 Mitsubishi Montero Sport 3.5 V6 GAS
Rear
- Raise vehicle off ground and support it with safety stands in proper locations.
- Make a reference mark across driveline and differential companion flange.
- Remove bolts, washer, and nuts...
CLICK HERE TO GET FULL ACCESS TO 1999 Mitsubishi Montero Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Mitsubishi Montero Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Mitsubishi Montero Sport cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Rear
Vehicle: 1999 Mitsubishi Montero Sport 2.4 L4 GAS
Rear
- Raise vehicle off ground and support it with safety stands in proper locations.
- Make a reference mark across driveline and differential companion flange.
- Remove bolts, washer, and nuts...
CLICK HERE TO GET FULL ACCESS TO 1999 Mitsubishi Montero Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Mitsubishi Montero Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Mitsubishi Montero Sport cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1999 Mitsubishi Montero Sport 3.5 V6 GAS
Front
Do not strike ABS rotors or outer race of driveshaft against other parts when removing or installing driveshaft. Use care not to strike pole piece at tip of front wheel speed sensor with tools when servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove front engine undercover bolts then undercover.
- Remove wheel nuts and front wheels.
- Remove brake caliper assembly bolts.
- On models equipped with ABS, remove bolt securing wheel speed sensor.
- Remove wheel hub cap, snap ring, and shim. Do not apply pressure to wheel bearing f...
CLICK HERE TO GET FULL ACCESS TO 1999 Mitsubishi Montero Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1999 Mitsubishi Montero Sport vehicle. |
Access the Complete guide! |