Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Saab 900 car and truck
repair procedures including Saab engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Saab 900 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Saab 900
- 1998 Saab 900 S 2.3 L4 GAS, CC:2290, Fuel Injection, Engine VIN:, Desg:B
- 1998 Saab 900 SE Turbo 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:N
- 1998 Saab 900 S Turbo 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:N
A/C & HEATER SERVICE PROCEDURES FOR 1998 Saab 900 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Saab 900 cars and light trucks from 1990+
Saab -> Component Replacement & Adjustment -> Compressor, Replace -> 9-3 -> 9-5 -> 900 -> 9000
Vehicle: 1998 Saab 900 S Turbo 2.0 L4 GAS
900
- Recover refrigerant as outlined under .
- Loosen adjusting link and remove compressor drive belt.
- Remove high and low pressure lines from compressor and cap open lines.
- Remove wiring from pressure switch.
- Remove compressor retaining bolts, then remove compressor.
- Reverse procedure to install, noting the following:
- Torque compressor mounting bolts to 17 ft. lbs.
- Torque A/C hoses at compressor to 15 ft. lbs.
- Refer to "ACC Air Flap Stepper Motor Calibration" in .
9000
- Recover refrigerant ...
CLICK HERE TO GET FULL ACCESS TO 1998 Saab 900 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Saab 900 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Saab 900 cars and light trucks from 1990+
Air Bag System Precautions -> Saab -> Disarming
Vehicle: 1998 Saab 900 S Turbo 2.0 L4 GAS
- Disconnect battery ground cable.
- On 1990-98 models, wait at least 20 minutes prior to performing any diagn...
CLICK HERE TO GET FULL ACCESS TO 1998 Saab 900 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Saab 900 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Saab 900 cars and light trucks from 1990+
Saab -> Component Replacement & Adjustment -> Refrigerant Lines, Replace -> 9-3 -> 9-5 -> 900 -> Compressor High-Pressure Hose -> Compressor High-Pressure Pipe -> Compressor Low & High Pressure Pipes -> Compressor Low-Pressure Hose -> Compressor Low-Pressure Pipe -> Evaporator High-Pressure Hose -> Evaporator High-Pressure Pipe -> Evaporator Low-Pressure Hose -> Evaporator Low-Pressure Pipe -> Installation -> Removal
Vehicle: 1998 Saab 900 S 2.3 L4 GAS
900
Compressor High-Pressure Hose
Removal
- Recover refrigerant as outlined under .
- Remove grille and lefthand headlamp.
- Remove screw holding high-pressure hose to compressor.
- On models equipped with turbocharged engine, remove hose between charge air cooler and damper housing, then the hose between charge air cooler and turbo unit.
- On all models, remove high-pressure pipe from clip on front crossmember.
- Remove screw on PAD connection at receiver-drier.
- Remove high-pressure hose.
Installatio...
CLICK HERE TO GET FULL ACCESS TO 1998 Saab 900 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Saab 900 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Saab 900 cars and light trucks from 1990+
Imported Cars & Light Trucks & Vans -> 1998-2000 -> Leak Test -> Electronic Leak Detectors -> Fluid Leak Detectors
Vehicle: 1998 Saab 900 SE Turbo 2.0 L4 GAS
Testing the refrigerant system for leaks is one of the most important phases of troubleshooting. One or more of the methods outlined will prove useful in detecting leaks or checking connections if service work is performed. Before beginning any leak test, attach a manifold gauge set and note pressure. If little or no pressure is indicated, a partial charge must be installed. Check all connections, compressor head gasket, oil filler plug and compressor shaft seal for leaks.
R-12 leak detectors will not detect R-134a leaks. For R-134a system an electronic type leak detector i...
CLICK HERE TO GET FULL ACCESS TO 1998 Saab 900 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Saab 900 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Saab 900 cars and light trucks from 1990+
Saab -> Automatic Temperature Control System Diagnosis & Testing -> Description -> ACC Unit & Power Supplies -> Solar Sensor -> Temperature Sensors
Vehicle: 1998 Saab 900 S 2.3 L4 GAS
The Automatic Climate Control (ACC) system controls the passenger compartment set temperature regardless of ambient temperature. The ACC control module uses inputs from the cabin, blended air and solar sensors to determine the amount of heat or air conditioning that is required to maintain the set temperature.
ACC Unit & Power Supplies
Indicators on the ACC unit consist of a two digit display of the selected temperature, and LEDs to indicate AUTO and/or the current manual selections. The two digit display is also used to indicate the number of faults, if any, which ma...
CLICK HERE TO GET FULL ACCESS TO 1998 Saab 900 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 1998 Saab 900 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1998 Saab 900 cars and light trucks from 1990+
Saab -> Wiring Diagrams -> Control Panel System
Vehicle: 1998 Saab 900 S Turbo 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1998 Saab 900 A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1998 Saab 900 vehicle.
|
| Access the Complete guide! |
