Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 1998 Mazda B2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Mazda B2500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Except Tribute -> Master Cylinder -> Tribute
Vehicle: 1998 Mazda B2500 2.5 L4 GAS
Master Cylinder
Except Tribute
- Disconnect brake fluid level sensor.
- Disconnect and cap brake fluid lines from master cylinder using Line Wrench tool No. 49-0259-770 A/B, or equivalent.
- Remove proportioning bypass valve attaching bolts and valve, if equipped.
- Remove bracket, if equipped, then the master cylinder assembly from the power brake booster.
- Reverse procedure to install, noting the following:
- On all models except B-Series, torque master cylinder nuts to 8-12 ft. lbs.
- On B-Series models, torque master cylinder nuts to 14-21 ft. lbs.
- On all models, bleed brake system.
Tribute
- D...
CLICK HERE TO GET FULL ACCESS TO 1998 Mazda B2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Mazda B2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Mazda B2500 cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 1998 Mazda B2500 2.5 L4 GAS
The anti-lock brake system (ABS) is composed of electrical and mechanical components as well as the standard braking system comp...
CLICK HERE TO GET FULL ACCESS TO 1998 Mazda B2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Mazda B2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Mazda B2500 cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> B-Series -> Front -> Miata -> Millenia -> MPV -> MX-6 & 626 -> Protege -> Rear -> Replacement -> Service -> Tribute
Vehicle: 1998 Mazda B2500 2.5 L4 GAS
Front
B-Series
Replacement
- Raise and support vehicle and remove wheel.
- Remove brake line and plug to avoid fluid loss and air entering line.
- Remove caliper mounting bolts.
- Reverse procedure to install.
Service
- Remove excess dirt from caliper assembly, then remove and discard dust boot.
- Place a piece of wood in caliper and gently blow compressed air into brake line hole to help force out piston. Do not pry piston out, as you may damage assembly.
- Inspect piston for wear and corrosion. Replace as needed.
- Remove piston seal and discard.
- Remove and inspect bleeder screw. Replace as needed.
- Inspec...
CLICK HERE TO GET FULL ACCESS TO 1998 Mazda B2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Mazda B2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Mazda B2500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> B-Series -> Except B-Series & Tribute -> Manual -> Pressure -> Tribute
Vehicle: 1998 Mazda B2500 2.5 L4 GAS
Except B-Series & Tribute
- Raise and support vehicle with jack stands.
- Fill reservoir with brake fluid, ensure reservoir is at least half full at all times during bleeding procedure.
- After removing bleeder cap, connect one end of transparent vinyl tube to bleeder and place other end in a clean, clear container that is half full with brake fluid.
- One person should depress pedal a few times, then hold the pedal depressed.
- A second person should loosen the bleeder screw and drain fluid, then retighten screw to specifications.
- Repeat steps 4 and 5 until there are no more air bubbles see...
CLICK HERE TO GET FULL ACCESS TO 1998 Mazda B2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Mazda B2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Mazda B2500 cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1997-98 -> 1999-2001 -> 4WABS -> Accessing Diagnostic Trouble Codes -> B-Series -> B-Series & Tribute -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Except B-Series & Tribute -> Four Wheel ABS (4WABS) -> Miata -> Millenia -> MPV -> MPV, 626 & Tribute -> MX-6 & 626 -> Protege -> RABS -> Rear ABS (RABS) -> Tribute
Vehicle: 1998 Mazda B2500 2.5 L4 GAS
Accessing Diagnostic Trouble Codes
Except B-Series & Tribute
- Connect New Generation Star (NGS), or equivalent, to data link connector and battery, Figs. and .
- On models except for B-Series and 626, set tool No. 49 T088 003, or equivalent to ABS.
- On all models, select " VEHICLE & ENGINE SELECTION" on NGS display and then select vehicle model, engine type and model year.
- Select "DIAGNOSTIC DATA LINK" on NGS display.
- Select "ANTI LOCK BRAKE MODULE" on NGS display.
- Select "DIAGNOSTIC TEST MODE" on NGS display.
- If a diagnostic trouble code is displayed, refer to " Diagnostic Trouble Code Interpr... "
CLICK HERE TO GET FULL ACCESS TO 1998 Mazda B2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Mazda B2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Mazda B2500 cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Check Valve -> Function Check -> Load Test
Vehicle: 1998 Mazda B2500 2.5 L4 GAS
Function Check
- Stop engine and depress brake pedal a few times to relieve vacuum.
- With pedal depressed, start engine. After starting engine, pedal should move down slightly. If so, unit is functioning.
- After engine has run two minutes, turn it off. Depress pedal with normal force.
- If the first pedal stroke is long and gets shorter with subsequent strokes, the unit is operating. If a problem is found, inspect check valve, vacuum hose and installation. Repair if required and inspect again.
- Start engine and depress pedal with usual force.
- Stop engine with pedal still depressed. Hold peda...
CLICK HERE TO GET FULL ACCESS TO 1998 Mazda B2500 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Mazda B2500 vehicle. |
Access the Complete guide! |