Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Ford F-350 Pickup car and truck repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1997 Ford F-350 Pickup automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1997 Ford F-350 Pickup

  • 1997 Ford F-350 Pickup 5.8 V8 GAS, CID:351, Fuel Injection, Aspiration:351, Engine VIN:, Desg:H
  • 1997 Ford F-350 Pickup 7.3 V8 DIESEL, CID:445, Fuel Injection, Aspiration:445, Engine VIN:, Desg:F
  • 1997 Ford F-350 Pickup 7.5 V8 GAS, CID:460, Fuel Injection, Aspiration:460, Engine VIN:, Desg:G
  • 1997 Ford F-350 Pickup Super CAB 5.8 V8 GAS, CID:351, Fuel Injection, Aspiration:351, Engine VIN:, Desg:H
  • 1997 Ford F-350 Pickup Super CAB 7.3 V8 DIESEL, CID:445, Fuel Injection, Aspiration:445, Engine VIN:, Desg:F
  • 1997 Ford F-350 Pickup Super CAB 7.5 V8 GAS, CID:460, Fuel Injection, Aspiration:460, Engine VIN:, Desg:G

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford F-350 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford F-350 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1997 Ford F-350 Pickup 7.5 V8 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1997 Ford F-350 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford F-350 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford F-350 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1997 Ford F-350 Pickup 5.8 V8 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1997 Ford F-350 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford F-350 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford F-350 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1997 Ford F-350 Pickup Super CAB 7.3 V8 DIESEL

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1997 Ford F-350 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford F-350 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford F-350 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 1997 Ford F-350 Pickup Super CAB 7.3 V8 DIESEL

Front

  • Raise and support the vehicle.
  • Index-mark front driveshaft to front axle flange and at transfer case flange.
  • Remove and discard bolts and U-joint retainers.
  • Remove and discard four flange bolts.
  • Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
  • Reverse procedure to install, noting the following:
    • Torque front propeller shaft flange bolts to 82 ft. lbs., if equipped.
    • Torque front propeller shaft U-joint retainer bolts to 15 ft. lbs.

...

CLICK HERE TO GET FULL ACCESS TO 1997 Ford F-350 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford F-350 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford F-350 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 1997 Ford F-350 Pickup 7.5 V8 GAS

Front

  • Raise and support the vehicle.
  • Index-mark front driveshaft to front axle flange and at transfer case flange.
  • Remove and discard bolts and U-joint retainers.
  • Remove and discard four flange bolts.
  • Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
  • Reverse procedure to install, noting the following:
    • Torque front propeller shaft flange bolts to 82 ft. lbs., if equipped.
    • Torque front propeller shaft U-joint retainer bolts to 15 ft. lbs.

...

CLICK HERE TO GET FULL ACCESS TO 1997 Ford F-350 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Ford F-350 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Ford F-350 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 1997 Ford F-350 Pickup Super CAB 7.5 V8 GAS

Single Cardan, Slip Yoke

Disassemble

Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.

  • Index-mark the shaft components.
  • Remove and discard all four snap rings.
  • Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
  • If necessary, use a pair of pliers to remove a bearing cup t...

CLICK HERE TO GET FULL ACCESS TO 1997 Ford F-350 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

Click here to view more details1972 Ford F-350 Pickup Brake Hose, Front, Provides long lasting performance; This is a high quality OE replacement brake hose..

Source: Auto Body Parts Store

$28.81

Click here to view more details about 1974 Ford F-350 Pickup Bumper Mounting Kit, Rear1974 Ford F-350 Pickup Bumper Mounting Kit, Rear, Designed to enhance the functionality and appearance of the bumper; Protects the bumper and boosts its capability of absorbing the impact during minor vehicle collision; For Universal Series bumpers..

Source: Auto Body Parts Store

$42.19

Click here to view more details2007 Ford Pickup Superduty Radiator, Radiator; 6.0LTR; V8 [Or 6.8LTR In 2007], , .

Source: Wheels / Rims, Mirrors & Lights Store

$148.45

Click here to view more details1980 Ford F-350 Pickup L6, 4.9 L, 300 CID Rebuilt Engine, Front sump pan, Dipstick in pan or in front of filter mounting in block. No Smog, Warranty: 3-Year/100,000 Mile, .

Source: Rebuilt Engines Store

$1,390.00

Click here to view more details1987 Ford F-350 Pickup Used Wiper Motor Front, over 8500 GVW, Very Good.

Source: Used Auto Parts Store

$66.00

Click here to view more details1983 Ford F-350 Pickup Used A/C Compressor, 6.9, AUTO, 4X4 INTEGRAL AC, 8-420 (6.9L), Very Good.

Source: Used Auto Parts Store

$103.00
More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Ford F-350 Pickup vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
GOT A WEBSITE?Make money with Automotix

Make money with Automotix Partner Program.

Learn more

Auto Repair Quick Search
Help me find