Auto Parts Search
We have info for following modifications of 1996 GMC G35/G3500 VAN
- 1996 GMC G35/G3500 VAN Savana 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 1996 GMC G35/G3500 VAN Savana 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:F
- 1996 GMC G35/G3500 VAN Savana 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:J
- 1996 GMC G35/G3500 VAN Rally 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:Z
- 1996 GMC G35/G3500 VAN Rally 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:K
- 1996 GMC G35/G3500 VAN Rally 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:N
- 1996 GMC G35/G3500 VAN Rally 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:Y
- 1996 GMC G35/G3500 VAN 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:K
- 1996 GMC G35/G3500 VAN 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:N
- 1996 GMC G35/G3500 VAN 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:Y
- 1996 GMC G35/G3500 VAN Vandura 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:Z
- 1996 GMC G35/G3500 VAN Vandura 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:K
- 1996 GMC G35/G3500 VAN Vandura 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:N
- 1996 GMC G35/G3500 VAN Vandura 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:Y
- 1996 GMC G35/G3500 VAN Special 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:Z
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 GMC G35/G3500 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 GMC G35/G3500 VAN cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece -> Rear
Vehicle: 1996 GMC G35/G3500 VAN Vandura 5.7 V8 GAS
Rear
One Piece
- Raise and support vehicle.
- Remove bolts from U-joint brackets at differential end of driveshaft.
- Lower differential end of driveshaft enough to clear differential.
- Place a suitable container under output shaft of transmission.
- Push driveshaft slightly forward towards transmission.
- Pull driveshaft rearward towards differential and remove from vehicle.
- Reverse procedure to install, noting following:
- Torque bolts to 27 ft. lbs.
Front
Important: It is essential that positions of all driveline components relative to propeller shaft and axles be observed and accurately referen...
CLICK HERE TO GET FULL ACCESS TO 1996 GMC G35/G3500 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 GMC G35/G3500 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 GMC G35/G3500 VAN cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> External Snap Ring Type -> Nylon Injected Ring Type
Vehicle: 1996 GMC G35/G3500 VAN Rally 6.5 V8 DIESEL
Nylon Injected Ring Type
Never clamp propeller shaft tubing In a vise. Clamping could dent or deform tube causing an Imbalance or unsafe condition. Always clamp on one of yokes and support shaft horizontally. Avoid damaging slip yoke sealing surface. Nicks may damage bushing or cut lip seal.
Disassemble
- Place universal joint so that lower ear of yoke is supported on a 30 mm (1 1/8 inch) socket.
- In order to shear plastic retaining ring on bearing cup, place special tool J 9522-3 or equivalent on open horizontal bearing cups and press lower bearing cup out of yoke ear. If ...
CLICK HERE TO GET FULL ACCESS TO 1996 GMC G35/G3500 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 GMC G35/G3500 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 GMC G35/G3500 VAN cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> External Snap Ring Type -> Nylon Injected Ring Type
Vehicle: 1996 GMC G35/G3500 VAN Vandura 6.5 V8 DIESEL
Nylon Injected Ring Type
Never clamp propeller shaft tubing In a vise. Clamping could dent or deform tube causing an Imbalance or unsafe condition. Always clamp on one of yokes and support shaft horizontally. Avoid damaging slip yoke sealing surface. Nicks may damage bushing or cut lip seal.
Disassemble
- Place universal joint so that lower ear of yoke is supported on a 30 mm (1 1/8 inch) socket.
- In order to shear plastic retaining ring on bearing cup, place special tool J 9522-3 or equivalent on open horizontal bearing cups and press lower bearing cup out of yoke ear. If ...
CLICK HERE TO GET FULL ACCESS TO 1996 GMC G35/G3500 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 GMC G35/G3500 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 GMC G35/G3500 VAN cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1996 GMC G35/G3500 VAN Rally 4.3 V6 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 1996 GMC G35/G3500 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 GMC G35/G3500 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 GMC G35/G3500 VAN cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> External Snap Ring Type -> Nylon Injected Ring Type
Vehicle: 1996 GMC G35/G3500 VAN Vandura 7.4 V8 GAS
Nylon Injected Ring Type
Never clamp propeller shaft tubing In a vise. Clamping could dent or deform tube causing an Imbalance or unsafe condition. Always clamp on one of yokes and support shaft horizontally. Avoid damaging slip yoke sealing surface. Nicks may damage bushing or cut lip seal.
Disassemble
- Place universal joint so that lower ear of yoke is supported on a 30 mm (1 1/8 inch) socket.
- In order to shear plastic retaining ring on bearing cup, place special tool J 9522-3 or equivalent on open horizontal bearing cups and press lower bearing cup out of yoke ear. If ...
CLICK HERE TO GET FULL ACCESS TO 1996 GMC G35/G3500 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 GMC G35/G3500 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 GMC G35/G3500 VAN cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece -> Rear
Vehicle: 1996 GMC G35/G3500 VAN 5.7 V8 GAS
Rear
One Piece
- Raise and support vehicle.
- Remove bolts from U-joint brackets at differential end of driveshaft.
- Lower differential end of driveshaft enough to clear differential.
- Place a suitable container under output shaft of transmission.
- Push driveshaft slightly forward towards transmission.
- Pull driveshaft rearward towards differential and remove from vehicle.
- Reverse procedure to install, noting following:
- Torque bolts to 27 ft. lbs.
Front
Important: It is essential that positions of all driveline components relative to propeller shaft and axles be observed and accurately referen...
CLICK HERE TO GET FULL ACCESS TO 1996 GMC G35/G3500 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 GMC G35/G3500 VAN vehicle. |
Access the Complete guide! |