Auto Parts Search
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Chrysler Town & Country AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Chrysler Town & Country cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Traction Control System Warning Lamp ->
Vehicle: 1993 Chrysler Town & Country 3.3 V6 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...
CLICK HERE TO GET FULL ACCESS TO 1993 Chrysler Town & Country MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Chrysler Town & Country AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Chrysler Town & Country cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Emission Maintenance Reminder Indicator -> Chrysler, Dodge & Plymouth
Vehicle: 1993 Chrysler Town & Country 3.3 V6 GAS
This Emission Maintenance Reminder System (Maintenance Required Lamp) is incorporated into the engine controller. The controller stores vehicle mileage into its memory every eight miles, then at 60,000, 82,500 or 120,000 miles it will light the EMR (Maintenance Required) lamp. When the indicated mileage is reached or the EMR lamp is on at all times, the following components must be replaced and the EMR lamp reset:
- At 60,00 miles, proceed as follows:
- Replace EGR valve.
- Clean EGR passage.
- Replace PCV valve.
- At 82,500 miles, replace oxygen sensor.
- At 120,000 miles, proceed as ...
CLICK HERE TO GET FULL ACCESS TO 1993 Chrysler Town & Country MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Chrysler Town & Country AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Chrysler Town & Country cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> EGR System Malfunction Indicator Lamp -> 1993-94 w/California Emissions & 1995-2001
Vehicle: 1993 Chrysler Town & Country 3.3 V6 GAS
The Powertrain Control Module (PCM) performs an On-Board Diagnostic (OBD) inspection of the EGR system on all California Vehicles. The diagnostic system uses the electronic EGR Transducer (EET) for the system tests.
The OBD inspection activates only during selected engine/driving conditions. When the conditions are met, the PCM energizes the EET solenoid to disable the EGR. The PCM inspects for a change in the oxygen sensor signal. If the air/fuel mixture goes lean, the PCM will attempt t...
CLICK HERE TO GET FULL ACCESS TO 1993 Chrysler Town & Country MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Chrysler Town & Country AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Chrysler Town & Country cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Anti-Lock Brake System Warning Lamp -> Chrysler, Dodge & Plymouth
Vehicle: 1993 Chrysler Town & Country 3.3 V6 GAS
The amber lamp monitors anti-lock brake system condition. The lamp should be on during engine starting, but should go off when the self-diagnostic system determines proper system operation. If the lamp remains On, a fault in the anti-lock brake system is indicated. After diagnosis and re...
CLICK HERE TO GET FULL ACCESS TO 1993 Chrysler Town & Country MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Chrysler Town & Country AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Chrysler Town & Country cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Check Gauge Warning Lamp ->
Vehicle: 1993 Chrysler Town & Country 3.3 V6 GAS
When the ignition is turned On, the lamp will light for approximately 2 seconds as a bulb inspection. The PCM continually monitors the engine oil pressure, engine coolant temperature and electrical system voltage. The check gauges lamp w...
CLICK HERE TO GET FULL ACCESS TO 1993 Chrysler Town & Country MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Chrysler Town & Country AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1993 Chrysler Town & Country cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Electronic Throttle Control Indicator ->
Vehicle: 1993 Chrysler Town & Country 3.3 V6 GAS
When the ignition is turned On, the lamp will light for approximately 6-12 seconds as a bulb inspection. If the lamp is illuminated with the engine running, the vehicle is usually drivable but the electronic throttle system must be diagnosed and servic...
CLICK HERE TO GET FULL ACCESS TO 1993 Chrysler Town & Country MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Chrysler Town & Country vehicle. |
Access the Complete guide! |