Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1990 Hyundai Sonata car and truck
repair procedures including Hyundai engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1990 Hyundai Sonata automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1990 Hyundai Sonata
- 1990 Hyundai Sonata 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:S
- 1990 Hyundai Sonata 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
- 1990 Hyundai Sonata GL 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:S
- 1990 Hyundai Sonata GL 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
- 1990 Hyundai Sonata GLS 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:S
- 1990 Hyundai Sonata GLS 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Hyundai Sonata GL 2.4 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove nut from tie rod end.
- Using tie rod end puller tool No. 09568-31000, or equivalent, disconnect tie rod end from knuckle.
- Remove nut from lower control arm ball joint stud.
- Disconnect lower control arm ball joint from knuckle using tie rod end puller tool No. 09568-31000, or equivalent.
- Remove driveshaft nut from hub.
- Using axle shaft puller tool No. 09526-11001, or equivalent, remove driveshaft from hub.
- Insert suitable pry bar...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Hyundai Sonata GLS 3.0 V6 GAS
- Raise and support vehicle, then remove front wheel.
- Remove nut from tie rod end.
- Using tie rod end puller tool No. 09568-31000, or equivalent, disconnect tie rod end from knuckle.
- Remove nut from lower control arm ball joint stud.
- Disconnect lower control arm ball joint from knuckle using tie rod end puller tool No. 09568-31000, or equivalent.
- Remove driveshaft nut from hub.
- Using axle shaft puller tool No. 09526-11001, or equivalent, remove driveshaft from hub.
- Insert suitable pry bar...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Hyundai Sonata GL 3.0 V6 GAS
- Raise and support vehicle, then remove front wheel.
- Remove nut from tie rod end.
- Using tie rod end puller tool No. 09568-31000, or equivalent, disconnect tie rod end from knuckle.
- Remove nut from lower control arm ball joint stud.
- Disconnect lower control arm ball joint from knuckle using tie rod end puller tool No. 09568-31000, or equivalent.
- Remove driveshaft nut from hub.
- Using axle shaft puller tool No. 09526-11001, or equivalent, remove driveshaft from hub.
- Insert suitable pry bar...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Hyundai Sonata 3.0 V6 GAS
- Raise and support vehicle, then remove front wheel.
- Remove nut from tie rod end.
- Using tie rod end puller tool No. 09568-31000, or equivalent, disconnect tie rod end from knuckle.
- Remove nut from lower control arm ball joint stud.
- Disconnect lower control arm ball joint from knuckle using tie rod end puller tool No. 09568-31000, or equivalent.
- Remove driveshaft nut from hub.
- Using axle shaft puller tool No. 09526-11001, or equivalent, remove driveshaft from hub.
- Insert suitable pry bar...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Hyundai Sonata 2.4 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove nut from tie rod end.
- Using tie rod end puller tool No. 09568-31000, or equivalent, disconnect tie rod end from knuckle.
- Remove nut from lower control arm ball joint stud.
- Disconnect lower control arm ball joint from knuckle using tie rod end puller tool No. 09568-31000, or equivalent.
- Remove driveshaft nut from hub.
- Using axle shaft puller tool No. 09526-11001, or equivalent, remove driveshaft from hub.
- Insert suitable pry bar...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1990 Hyundai Sonata GLS 2.4 L4 GAS
- Raise and support vehicle, then remove front wheel.
- Remove nut from tie rod end.
- Using tie rod end puller tool No. 09568-31000, or equivalent, disconnect tie rod end from knuckle.
- Remove nut from lower control arm ball joint stud.
- Disconnect lower control arm ball joint from knuckle using tie rod end puller tool No. 09568-31000, or equivalent.
- Remove driveshaft nut from hub.
- Using axle shaft puller tool No. 09526-11001, or equivalent, remove driveshaft from hub.
- Insert suitable pry bar...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1990 Hyundai Sonata vehicle.
|
| Access the Complete guide! |
