Auto Parts Search
We have info for following modifications of 1990 Hyundai Sonata
- 1990 Hyundai Sonata 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:S
- 1990 Hyundai Sonata 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
- 1990 Hyundai Sonata GL 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:S
- 1990 Hyundai Sonata GL 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
- 1990 Hyundai Sonata GLS 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:S
- 1990 Hyundai Sonata GLS 3.0 V6 GAS, CC:2972, Fuel Injection, Engine VIN:, Desg:T
BRAKE SERVICE PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
HYUNDAI -> Disc Brakes -> BRAKE PADS, Replace -> ELANTRA & SONATA -> EXCEL & SCOUPE -> Front -> Rear
Vehicle: 1990 Hyundai Sonata GLS 3.0 V6 GAS
EXCEL & SCOUPE
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove lower bolt and caliper assembly, Fig. . Position assembly aside using suitable wire.
- Remove brake pads and shim.
- Bottom piston in caliper using suitable tool.
- Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
ELANTRA & SONATA
Front
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove two attaching bolts from torque plate, Fig. .
- Remove brake cylinder, then position aside using suitable wire.
- Remove brake pads.
- Install pads clips, then the pads onto...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
HYUNDAI, HYDRAULIC BRAKE SYSTEM -> MASTER CYLINDER REPLACEMENT -> EXCEPT SCOUPE & SONATA w/BENDIX SYSTEM -> SCOUPE & SONATA w/BENDIX SYSTEM
Vehicle: 1990 Hyundai Sonata GL 2.4 L4 GAS
EXCEPT SCOUPE & SONATA w/BENDIX SYSTEM
- Disconnect electrical connector from fluid level switch, if equipped, Figs. through .
- Disconnect brake lines from master cylinder and plug open ports.
- Remove master cylinder mounting nuts, disconnect proportioning valve mounting bracket, if equipped, then remove master cylinder from vehicle.
- Reverse procedure to install, noting the following:
- Tighten master cylinder mounting nuts and brake lines to specifications.
- On 1989 Excel and Sonat...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
HYUNDAI, POWER BRAKE UNITS -> TROUBLESHOOTING -> CHECK VALVE OPERATION
Vehicle: 1990 Hyundai Sonata 3.0 V6 GAS
CHECK VALVE OPERATION
- Remove booster hose from check valve.
- Start engi...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
HYUNDAI, HYDRAULIC BRAKE SYSTEM -> BLEEDING BRAKES
Vehicle: 1990 Hyundai Sonata 2.4 L4 GAS
- Fill master cylinder reservoir with brake fluid.
- Using a suitable length and diameter of vinyl hose, insert end of hose into a container full of brake fluid.
- Secure other end of hose to wheel cylinder bleeder plug farthest from master cylinder.
- An assistant should depress brake ped...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
HYUNDAI, ANTI-LOCK BRAKES -> COMPONENT REPLACEMENT -> ELECTRONIC CONTROL UNIT (ECU) -> Front Wheel Sensors -> MODULATOR -> Rear Wheel Sensors -> SENSORS
Vehicle: 1990 Hyundai Sonata 2.4 L4 GAS
ELECTRONIC CONTROL UNIT (ECU)
- Disconnect ECU electrical connector, then remove mounting bolts and washers, Fig. .
- Remove ECU from vehicle.
- Reverse procedure to install.
MODULATOR
- Drain master cylinder by opening caliper bleed screws, refer to "Bleeding System."
- Remove any remaining fluid with a syringe, then disconnect six brake lines from modulator.
- Remove mounting bolts and washers, then the modulator.
- R...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1990 Hyundai Sonata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1990 Hyundai Sonata cars and light trucks from 1990+.
HYUNDAI, POWER BRAKE UNITS -> TROUBLESHOOTING -> CHECK VALVE OPERATION
Vehicle: 1990 Hyundai Sonata GLS 2.4 L4 GAS
CHECK VALVE OPERATION
- Remove booster hose from check valve.
- Start engi...
CLICK HERE TO GET FULL ACCESS TO 1990 Hyundai Sonata BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Hyundai Sonata vehicle. |
Access the Complete guide! |