Auto Parts Search
We have info for following modifications of 2010 Ford F-450 Super Duty
- 2010 Ford F-450 Super Duty Lariat 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2010 Ford F-450 Super Duty XL 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2010 Ford F-450 Super Duty XLT 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2010 Ford F-450 Super Duty HARLEY-DAVIDSON Edition 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
- 2010 Ford F-450 Super Duty King Ranch 6.4 V8 DIESEL, CID:391, Fuel Injection, Aspiration:391, Engine VIN:, Desg:R
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Ford F-450 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Ford F-450 Super Duty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2010 Ford F-450 Super Duty XL 6.4 V8 DIESEL
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2010 Ford F-450 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Ford F-450 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Ford F-450 Super Duty cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2010 Ford F-450 Super Duty XL 6.4 V8 DIESEL
Front
Warning: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the righthand kick panel area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
- With vehicle in NEUTRAL, position on a hoist.
- Remove the front wheel and tire assembly.
- Remove dust cap and nut from axle halfsha...
CLICK HERE TO GET FULL ACCESS TO 2010 Ford F-450 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Ford F-450 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Ford F-450 Super Duty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2010 Ford F-450 Super Duty HARLEY-DAVIDSON Edition 6.4 V8 DIESEL
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2010 Ford F-450 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Ford F-450 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Ford F-450 Super Duty cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Double Cardan -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2010 Ford F-450 Super Duty XLT 6.4 V8 DIESEL
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2010 Ford F-450 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Ford F-450 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Ford F-450 Super Duty cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2010 Ford F-450 Super Duty XL 6.4 V8 DIESEL
Front
- Raise and support the vehicle.
- Index-mark front driveshaft to front axle flange and at transfer case flange.
- Remove and discard bolts and U-joint retainers.
- Remove and discard four flange bolts.
- Compress and separate front driveshaft from front axle, then separate driveshaft from transfer case. Wrap electrical tape around the bearing cups to prevent them from falling off the U-joint spider.
- Reverse procedure to install, noting the following:
- Torque flange bolts to 82 ft. lbs.
- Torque U-joint retainer bolts to 26 ft. lbs.
Rear
One Piece Driveshaft
- Raise and support vehicle.
- To maint...
CLICK HERE TO GET FULL ACCESS TO 2010 Ford F-450 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2010 Ford F-450 Super Duty AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2010 Ford F-450 Super Duty cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2010 Ford F-450 Super Duty XLT 6.4 V8 DIESEL
Front
Warning: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the righthand kick panel area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
- With vehicle in NEUTRAL, position on a hoist.
- Remove the front wheel and tire assembly.
- Remove dust cap and nut from axle halfsha...
CLICK HERE TO GET FULL ACCESS TO 2010 Ford F-450 Super Duty DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2010 Ford F-450 Super Duty vehicle. |
Access the Complete guide! |