Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 MERCEDES-BENZ C300 car and truck
repair procedures including MERCEDES-BENZ engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 MERCEDES-BENZ C300 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 MERCEDES-BENZ C300
- 2009 MERCEDES-BENZ C300 Sport 3.0 V6 GAS, CC:2996, Fuel Injection
- 2009 MERCEDES-BENZ C300 Luxury 3.0 V6 GAS, CC:2996, Fuel Injection
- 2009 MERCEDES-BENZ C300 4matic Sport 3.0 V6 GAS, CC:2996, Fuel Injection
- 2009 MERCEDES-BENZ C300 4matic Luxury 3.0 V6 GAS, CC:2996, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 MERCEDES-BENZ C300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 MERCEDES-BENZ C300 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 MERCEDES-BENZ C300 Luxury 3.0 V6 GAS
- Raise and support vehicle.
- Remove front wheels.
- Unscrew hexagon collar bolt on front axle shaft.
- Take off bottom engine compartment panel at front.
- Detach linkage for headlamp leveling device on lower transverse control arm.
- Press supporting joint out of steering knuckle.
- Turn front of steering knuckle outwards and then pull outwards, while moving front axle shaft out of front axle shaft flange. Do not damage boots of front axle shaft and of supporting joint. If required, to loosen front axle shaft, screw in hexagon-collar bolt again a few threads and drive out front axle shaft...
CLICK HERE TO GET FULL ACCESS TO 2009 MERCEDES-BENZ C300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 MERCEDES-BENZ C300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 MERCEDES-BENZ C300 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 MERCEDES-BENZ C300 4matic Sport 3.0 V6 GAS
- Raise and support vehicle.
- Remove front wheels.
- Unscrew hexagon collar bolt on front axle shaft.
- Take off bottom engine compartment panel at front.
- Detach linkage for headlamp leveling device on lower transverse control arm.
- Press supporting joint out of steering knuckle.
- Turn front of steering knuckle outwards and then pull outwards, while moving front axle shaft out of front axle shaft flange. Do not damage boots of front axle shaft and of supporting joint. If required, to loosen front axle shaft, screw in hexagon-collar bolt again a few threads and drive out front axle shaft...
CLICK HERE TO GET FULL ACCESS TO 2009 MERCEDES-BENZ C300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 MERCEDES-BENZ C300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 MERCEDES-BENZ C300 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2009 MERCEDES-BENZ C300 4matic Luxury 3.0 V6 GAS
Front
- Raise and support vehicle.
- Remove right-hand sensor, downstream of TWC.
- Match mark front propeller shaft relative to flange of front axle gear and to flange of transfer case.
- Detach front propeller shaft from flange of front axle gear.
- Detach front propeller shaft from flange of transfer case.
- Remove propeller shaft from front axle gear.
- Reverse procedure to install, noting the following:
- Torque flexible coupling to transfer case (M10) 108 in. lbs. (M12) 13 ft. lbs.
- Torque flexible coupling to front axle gear to (M10) 108 in. lbs. (M12) 13 ft. lbs.
Rear
- Raise and support vehicle.
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 MERCEDES-BENZ C300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 MERCEDES-BENZ C300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 MERCEDES-BENZ C300 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2009 MERCEDES-BENZ C300 4matic Sport 3.0 V6 GAS
Front
- Raise and support vehicle.
- Remove right-hand sensor, downstream of TWC.
- Match mark front propeller shaft relative to flange of front axle gear and to flange of transfer case.
- Detach front propeller shaft from flange of front axle gear.
- Detach front propeller shaft from flange of transfer case.
- Remove propeller shaft from front axle gear.
- Reverse procedure to install, noting the following:
- Torque flexible coupling to transfer case (M10) 108 in. lbs. (M12) 13 ft. lbs.
- Torque flexible coupling to front axle gear to (M10) 108 in. lbs. (M12) 13 ft. lbs.
Rear
- Raise and support vehicle.
- ...
CLICK HERE TO GET FULL ACCESS TO 2009 MERCEDES-BENZ C300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 MERCEDES-BENZ C300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 MERCEDES-BENZ C300 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 MERCEDES-BENZ C300 4matic Luxury 3.0 V6 GAS
- Raise and support vehicle.
- Remove front wheels.
- Unscrew hexagon collar bolt on front axle shaft.
- Take off bottom engine compartment panel at front.
- Detach linkage for headlamp leveling device on lower transverse control arm.
- Press supporting joint out of steering knuckle.
- Turn front of steering knuckle outwards and then pull outwards, while moving front axle shaft out of front axle shaft flange. Do not damage boots of front axle shaft and of supporting joint. If required, to loosen front axle shaft, screw in hexagon-collar bolt again a few threads and drive out front axle shaft...
CLICK HERE TO GET FULL ACCESS TO 2009 MERCEDES-BENZ C300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 MERCEDES-BENZ C300 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 MERCEDES-BENZ C300 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2009 MERCEDES-BENZ C300 Sport 3.0 V6 GAS
- Raise and support vehicle.
- Remove front wheels.
- Unscrew hexagon collar bolt on front axle shaft.
- Take off bottom engine compartment panel at front.
- Detach linkage for headlamp leveling device on lower transverse control arm.
- Press supporting joint out of steering knuckle.
- Turn front of steering knuckle outwards and then pull outwards, while moving front axle shaft out of front axle shaft flange. Do not damage boots of front axle shaft and of supporting joint. If required, to loosen front axle shaft, screw in hexagon-collar bolt again a few threads and drive out front axle shaft...
CLICK HERE TO GET FULL ACCESS TO 2009 MERCEDES-BENZ C300 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 MERCEDES-BENZ C300 vehicle.
|
| Access the Complete guide! |
