Auto Parts Search
We have info for following modifications of 2009 Ford Flex
- 2009 Ford Flex Limited 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:C
- 2009 Ford Flex SE 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:C
- 2009 Ford Flex SEL 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:C
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Flex AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Flex cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2009 Ford Flex SEL 3.5 V6 GAS
Front
- With vehicle in NEUTRAL, position it on a hoist.
- Remove front tire and wheel assembly.
- Remove and discard front wheel hub nut. Apply brake to keep halfshaft from rotating.
- Remove ball joint nut and separate lower control arm from knuckle.
- Separate halfshaft from wheel hub, using front wheel hub remover tool No. 205-D070 or equivalent.
- For right front halfshaft, proceed as follows:
- Remove bolt from brake tube bracket.
- Remove lower scrivets from rubber shield and position shield aside.
- For all halfshafts, pull knuckle outboard and rotate it toward rear of vehicle. Support knuc...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Flex DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Flex AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Flex cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2009 Ford Flex Limited 3.5 V6 GAS
Front
- With vehicle in NEUTRAL, position it on a hoist.
- Remove front tire and wheel assembly.
- Remove and discard front wheel hub nut. Apply brake to keep halfshaft from rotating.
- Remove ball joint nut and separate lower control arm from knuckle.
- Separate halfshaft from wheel hub, using front wheel hub remover tool No. 205-D070 or equivalent.
- For right front halfshaft, proceed as follows:
- Remove bolt from brake tube bracket.
- Remove lower scrivets from rubber shield and position shield aside.
- For all halfshafts, pull knuckle outboard and rotate it toward rear of vehicle. Support knuc...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Flex DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Flex AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Flex cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2009 Ford Flex SE 3.5 V6 GAS
Do not reuse the bolts and cap straps for either the center U-joint or the rear U-joint. Install new bolts and cap straps or damage to the vehicle may occur. There is a difference in length of the head of the replacement yoke strap bolts from the production ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Flex DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Flex AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Flex cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2009 Ford Flex SEL 3.5 V6 GAS
Do not reuse the bolts and cap straps for either the center U-joint or the rear U-joint. Install new bolts and cap straps or damage to the vehicle may occur. There is a difference in length of the head of the replacement yoke strap bolts from the production ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Flex DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Flex AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Flex cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 2009 Ford Flex Limited 3.5 V6 GAS
Do not reuse the bolts and cap straps for either the center U-joint or the rear U-joint. Install new bolts and cap straps or damage to the vehicle may occur. There is a difference in length of the head of the replacement yoke strap bolts from the production ...
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Flex DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Ford Flex AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Ford Flex cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2009 Ford Flex Limited 3.5 V6 GAS
Index-mark both driveshaft flanges.
- With vehicle in NEUTRAL, position it on a hoist.
- Remove muffler and tailpipe.
- Remove exhaust support brace bolts and exhaust brace.
- Remove and discard CV joint flange bolt and washer assemblies. Do not reuse the bolt and washer assemblies for the rear constant velocity (CV) joint flange. Install new assemblies or damage to the vehicle may occur.
- Separate driveshaft CV flange from rear drive unit flange using a flat blade screwdriver.
- Remove and discard driveshaft-to-transfer case bolts....
CLICK HERE TO GET FULL ACCESS TO 2009 Ford Flex DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Ford Flex vehicle. |
Access the Complete guide! |