Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Dodge Avenger car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Dodge Avenger automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Dodge Avenger
- 2009 Dodge Avenger R/T 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:M
- 2009 Dodge Avenger SXT 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
- 2009 Dodge Avenger SXT 2.7 V6 FLEX, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:D
- 2009 Dodge Avenger SXT 2.4 L4 GAS, CC:2360, CID:144, Fuel Injection, Aspiration:144, Engine VIN:, Desg:B
- 2009 Dodge Avenger SXT 2.4 L4 GAS, CC:2360, CID:144, Fuel Injection, Aspiration:144, Engine VIN:, Desg:B
- 2009 Dodge Avenger SE 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
- 2009 Dodge Avenger SE 2.7 V6 FLEX, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:D
- 2009 Dodge Avenger SE 2.4 L4 GAS, CC:2360, CID:144, Fuel Injection, Aspiration:144, Engine VIN:, Desg:B
- 2009 Dodge Avenger SE 2.4 L4 GAS, CC:2360, CID:144, Fuel Injection, Aspiration:144, Engine VIN:, Desg:B
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Avenger AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Avenger cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Dodge Avenger SE 2.7 V6 FLEX
- Disconnect and isolate battery ground cable at battery.
- Remove radiator fan.
- Remove alternator drive belt.
- Remove lower mounting bolt.
- Unsnap plastic protective cover from B+ mounting stud.
- Remove B+ terminal mounting nut and B+ terminal at rear of alternator.
- Disconnect field wire electrical ...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Avenger STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Avenger AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Avenger cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Dodge Avenger SE 2.7 V6 GAS
- Disconnect and isolate battery ground cable at battery.
- Remove radiator fan.
- Remove alternator drive belt.
- Remove lower mounting bolt.
- Unsnap plastic protective cover from B+ mounting stud.
- Remove B+ terminal mounting nut and B+ terminal at rear of alternator.
- Disconnect field wire electrical ...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Avenger STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Avenger AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Avenger cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Dodge Avenger SXT 2.4 L4 GAS
- Disconnect and isolate battery ground cable at battery.
- Remove right front wheel.
- Remove underbody air dam.
- Remove accessory drive splash shield.
- Remove serpentine drive belt.
- Remove accessory drive idler pulley.
- Loosen lower mounting bolt.
- Loosen A/C compressor and relocate; pull down and to outboard side of vehicle to make room to remove alternator.
- Disconnect field wire electrical connector by pushing on connector tab.
- Unsnap plastic protective cover from B+ m...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Avenger STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Avenger AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Avenger cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2009 Dodge Avenger SE 2.4 L4 GAS
- Disconnect and isolate battery ground cable at battery.
- Remove air cleaner box and air tube.
- Remove starter mounting bolt.
- Disconnect electrical connector at throttle body.
- Remove throttle body bolts and remove throttle body.
- Push starter under intake manifold.
- Tip starter nose to...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Avenger STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Avenger AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Avenger cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Dodge Avenger SXT 2.4 L4 GAS
- Disconnect and isolate battery ground cable at battery.
- Remove right front wheel.
- Remove underbody air dam.
- Remove accessory drive splash shield.
- Remove serpentine drive belt.
- Remove accessory drive idler pulley.
- Loosen lower mounting bolt.
- Loosen A/C compressor and relocate; pull down and to outboard side of vehicle to make room to remove alternator.
- Disconnect field wire electrical connector by pushing on connector tab.
- Unsnap plastic protective cover from B+ m...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Avenger STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Avenger AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Avenger cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2009 Dodge Avenger SE 2.7 V6 GAS
- Disconnect and isolate battery ground cable at battery.
- Remove front mount through bolt.
- Remove lower engine anti-roll mount bolt.
- Remove crossmember mounting bolts.
- Remove crossmember from vehicle.
- Remove torque reaction bracket transmission to starter bolt.
- Remove battery ground cable.
- Remove torque reaction bracket to transmission bolt.
- Remove torque reaction bracket to engine bolt.
- Remove torque reaction bracket from vehicle.
- Remove battery cable nut, ignition sense wire and battery cable from solenoid stud.
- Disconnect electrical connect...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Avenger STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Dodge Avenger vehicle.
|
| Access the Complete guide! |
