Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Toyota Sienna car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Toyota Sienna automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Toyota Sienna
- 2008 Toyota Sienna CE 3.5 V6 GAS, CC:3456, Fuel Injection
- 2008 Toyota Sienna LE 3.5 V6 GAS, CC:3456, Fuel Injection
- 2008 Toyota Sienna XLE 3.5 V6 GAS, CC:3456, Fuel Injection
- 2008 Toyota Sienna Limited 3.5 V6 GAS, CC:3456, Fuel Injection
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Toyota Sienna AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Toyota Sienna cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Toyota Sienna Limited 3.5 V6 GAS
- Remove battery.
- Remove No. 2 air cleaner inlet.
- Remove air cleaner cap subassembly.
- Remove air cleaner filter element.
- Remove air cleaner case subassembly.
- Remove two bolts and air cleaner bracket.
- Remove bolt and No. 1 air cleaner inlet.
- Disconnect starter connector.
- Open terminal cap and remove nut and starter wire.
- Remove two bolts and st...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sienna STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Toyota Sienna AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Toyota Sienna cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Toyota Sienna CE 3.5 V6 GAS
- Remove V-bank cover subassembly.
- Remove righthand front wheel.
- Remove No. 1 engine under cover.
- Remove righthand front fender apron seal.
- Drain engine coolant into a suitable container.
- Remove No. 2 air cleaner inlet.
- Remove battery.
- Remove front bumper assembly.
- Remove front bumper energy absorber.
- Remove No. 1 air cleaner inlet.
- Disconnect radiator reserve tank hose or pipe.
- Disconnect No. 1 radiator hose.
- Disconnect No. 2 radiator hose.
- Remove hood lock release lever protector.
- Remove hood lock assembly.
- Remove hood lock support subassembly.
- Disconnect cooling fan ECU connector.
- Remove ra...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sienna STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Toyota Sienna AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Toyota Sienna cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Toyota Sienna LE 3.5 V6 GAS
- Remove battery.
- Remove No. 2 air cleaner inlet.
- Remove air cleaner cap subassembly.
- Remove air cleaner filter element.
- Remove air cleaner case subassembly.
- Remove two bolts and air cleaner bracket.
- Remove bolt and No. 1 air cleaner inlet.
- Disconnect starter connector.
- Open terminal cap and remove nut and starter wire.
- Remove two bolts and st...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sienna STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Toyota Sienna AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Toyota Sienna cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 Toyota Sienna CE 3.5 V6 GAS
- Remove battery.
- Remove No. 2 air cleaner inlet.
- Remove air cleaner cap subassembly.
- Remove air cleaner filter element.
- Remove air cleaner case subassembly.
- Remove two bolts and air cleaner bracket.
- Remove bolt and No. 1 air cleaner inlet.
- Disconnect starter connector.
- Open terminal cap and remove nut and starter wire.
- Remove two bolts and st...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sienna STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Toyota Sienna AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Toyota Sienna cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Toyota Sienna XLE 3.5 V6 GAS
- Remove V-bank cover subassembly.
- Remove righthand front wheel.
- Remove No. 1 engine under cover.
- Remove righthand front fender apron seal.
- Drain engine coolant into a suitable container.
- Remove No. 2 air cleaner inlet.
- Remove battery.
- Remove front bumper assembly.
- Remove front bumper energy absorber.
- Remove No. 1 air cleaner inlet.
- Disconnect radiator reserve tank hose or pipe.
- Disconnect No. 1 radiator hose.
- Disconnect No. 2 radiator hose.
- Remove hood lock release lever protector.
- Remove hood lock assembly.
- Remove hood lock support subassembly.
- Disconnect cooling fan ECU connector.
- Remove ra...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sienna STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Toyota Sienna AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 Toyota Sienna cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2008 Toyota Sienna Limited 3.5 V6 GAS
- Remove V-bank cover subassembly.
- Remove righthand front wheel.
- Remove No. 1 engine under cover.
- Remove righthand front fender apron seal.
- Drain engine coolant into a suitable container.
- Remove No. 2 air cleaner inlet.
- Remove battery.
- Remove front bumper assembly.
- Remove front bumper energy absorber.
- Remove No. 1 air cleaner inlet.
- Disconnect radiator reserve tank hose or pipe.
- Disconnect No. 1 radiator hose.
- Disconnect No. 2 radiator hose.
- Remove hood lock release lever protector.
- Remove hood lock assembly.
- Remove hood lock support subassembly.
- Disconnect cooling fan ECU connector.
- Remove ra...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sienna STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Toyota Sienna vehicle.
|
| Access the Complete guide! |
