Auto Parts Search
We have info for following modifications of 2008 Toyota Sequoia
- 2008 Toyota Sequoia Limited 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
- 2008 Toyota Sequoia Limited 5.7 V8 GAS, CC:5663, CID:345, Fuel Injection, Aspiration:345
- 2008 Toyota Sequoia SR5 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
- 2008 Toyota Sequoia SR5 5.7 V8 GAS, CC:5663, CID:345, Fuel Injection, Aspiration:345
- 2008 Toyota Sequoia Platinum 5.7 V8 GAS, CC:5663, CID:345, Fuel Injection, Aspiration:345
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Toyota Sequoia AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Toyota Sequoia cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2008 Toyota Sequoia SR5 5.7 V8 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at water outlet.
- Remove hose from water outlet.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at ...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sequoia RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Toyota Sequoia AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Toyota Sequoia cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2008 Toyota Sequoia Limited 4.7 V8 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at water outlet.
- Remove hose from water outlet.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp a...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sequoia RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Toyota Sequoia AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Toyota Sequoia cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Toyota Sequoia SR5 5.7 V8 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet housing.
- Remove hose from water inlet housing.
- Remove hose from vehicle.
- Reverse pr...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sequoia RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Toyota Sequoia AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Toyota Sequoia cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Toyota Sequoia Limited 5.7 V8 GAS
- Disconnect battery ground cable.
- Remove No. 1 engine under cover.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Remove front bumper cover assembly.
- On models with Trailer Towing System, remove No. 1 front bumper righthand side retainer sub-assembly.
- Remove oil cooler assembly.
- On all models, remove engine cover sub-assembly.
- Remove inlet radiator hose.
- Disconnect outlet radiator hose from water inlet housing.
- On models with Trailer Towing System, loosen four nuts holding fluid coupling and fan.
- Remove fan and generator V belt.
- Detach claw to open No....
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sequoia RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Toyota Sequoia AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Toyota Sequoia cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Toyota Sequoia Platinum 5.7 V8 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet housing.
- Remove hose from water inlet housing.
- Remove hose from vehicle.
- Reverse pr...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sequoia RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Toyota Sequoia AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Toyota Sequoia cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Toyota Sequoia SR5 4.7 V8 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet.
- Remove hose from water inlet.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2008 Toyota Sequoia RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Toyota Sequoia vehicle. |
Access the Complete guide! |