Auto Parts Search
We have info for following modifications of 2008 Pontiac Torrent
- 2008 Pontiac Torrent 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:F
- 2008 Pontiac Torrent GXP 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Pontiac Torrent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Pontiac Torrent cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2008 Pontiac Torrent GXP 3.6 V6 GAS
Front
Observe and accurately reference mark the positions of all driveline components relative to the propeller shaft prior to disassembly. These components include the propeller shafts, drive axles, pinion flange, inner axle shafts, etc. Reassemble all components in the exact relationship the components had to one another prior to disassembly. Follow the specifications, torque values and any measurement made prior to disassembly in order to maintain the factory system balance of the driveline components. System balance provides a smoother running driveline operation.
- Unloc...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Torrent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Pontiac Torrent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Pontiac Torrent cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2008 Pontiac Torrent 3.4 V6 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Torrent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Pontiac Torrent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Pontiac Torrent cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2008 Pontiac Torrent 3.4 V6 GAS
Front
Observe and accurately reference mark the positions of all driveline components relative to the propeller shaft prior to disassembly. These components include the propeller shafts, drive axles, pinion flange, inner axle shafts, etc. Reassemble all components in the exact relationship the components had to one another prior to disassembly. Follow the specifications, torque values and any measurement made prior to disassembly in order to maintain the factory system balance of the driveline components. System balance provides a smoother running driveline operation.
- Unloc...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Torrent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Pontiac Torrent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Pontiac Torrent cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 2008 Pontiac Torrent 3.4 V6 GAS
Remove
- Place transmission in neutral.
- Raise and support vehicle.
- Index mark relationship of propeller shaft to rear drive module flange.
- Remove bolts securing underbody guard loop.
- Remove underbody guard loop.
- Place a support under propeller shaft at rear drive module.
- Remove bolts securing propeller shaft yoke flange to rear drive module flange.
- Index mark relationship of propeller shaft to power take-off unit (PTU) flange.
- Place a support under propeller shaft at PTU.
- Remove bolts securing propeller shaft to PTU flange.
- Place a support under propeller shaft at support bearing.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Torrent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Pontiac Torrent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Pontiac Torrent cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 2008 Pontiac Torrent GXP 3.6 V6 GAS
Remove
- Place transmission in neutral.
- Raise and support vehicle.
- Index mark relationship of propeller shaft to rear drive module flange.
- Remove bolts securing underbody guard loop.
- Remove underbody guard loop.
- Place a support under propeller shaft at rear drive module.
- Remove bolts securing propeller shaft yoke flange to rear drive module flange.
- Index mark relationship of propeller shaft to power take-off unit (PTU) flange.
- Place a support under propeller shaft at PTU.
- Remove bolts securing propeller shaft to PTU flange.
- Place a support under propeller shaft at support bearing.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Torrent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Pontiac Torrent AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Pontiac Torrent cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2008 Pontiac Torrent GXP 3.6 V6 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2008 Pontiac Torrent DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Pontiac Torrent vehicle. |
Access the Complete guide! |