Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Mercury Mariner car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Mercury Mariner automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Mercury Mariner
- 2008 Mercury Mariner Premier 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2008 Mercury Mariner Hybrid 2.3 L4 ELECTRIC/GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:H
- 2008 Mercury Mariner 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2008 Mercury Mariner 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Mariner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Mariner cars and light trucks from 1990+.
Disc Brakes -> Rotor Replace -> E-Series -> Edge & MKX -> Escape & Mariner -> Expedition & Navigator -> Explorer & Mountaineer -> Explorer Sport/Sport Trac -> F-150 & Mark LT -> F-250/350 w/2WD -> F-250/350 w/4WD & F-450/550 -> F-Super Duty & Motorhome -> Freestar & Monterey -> Front -> Installation -> Motorhome -> Ranger -> Rear -> Removal
Vehicle: 2008 Mercury Mariner Premier 3.0 V6 GAS
Edge & MKX
- Remove disc brake caliper and anchor plate as outlined in .
- Remove rotor
- Reverse Procedure to install. Tighten all nuts and bolts to specification.
Escape & Mariner
- Remove disc brake caliper and anchor plate as outlined in "."
- Remove rotor
- Reverse Procedure to install. Tighten all nuts and bolts to specification.
E-Series
Front
Refer to Figs. through and remove components in sequence listed.
Rear
Removal
- Remove disc brake caliper, refer to .
- Remove axle shafts.
- Lift lock washer tab from slot in outer lock nut, Figs. through .
- Remove outer lock nut using Front Wheel Bearing Spanner too...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Mariner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Mariner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Mariner cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing
Vehicle: 2008 Mercury Mariner Hybrid 2.3 L4 ELECTRIC/GAS
Refer to Figs. and f...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Mariner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Mariner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Mariner cars and light trucks from 1990+.
Disc Brakes -> Inspection -> Brake Bleed -> Brake Disc Service -> Brake Linings -> Brake Roughness -> Caliper Inspection -> General Precautions
Vehicle: 2008 Mercury Mariner 3.0 V6 GAS
Brake Linings
Remove both front wheels and inspect the brake discs, calipers and linings. (Wheel bearings should be inspected at this time and repacked if required).
Do not get any oil or grease on the linings. It is recommended that both front wheel sets be replaced whenever a respective shoe and lining is worn or damaged. Inspect and, if required, replace rear brake linings also.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of the...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Mariner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Mariner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Mariner cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> E-250 w/Tension Limiter -> E-450 & E-550 -> E-Super Duty -> Expedition, Explorer, F-Super Duty, Mountaineer & Navigator -> Freestar & Monterey -> Parking Brake -> Rear Disc
Vehicle: 2008 Mercury Mariner 2.3 L4 GAS
Parking Brake
Expedition, Explorer, F-Super Duty, Mountaineer & Navigator
Rear Disc
- Remove rear disc brake rotor as outlined in .
- Measure inside diameter of parking brake drum using brake adjustment gauge tool No. D81L-1103-A, or equivalent, Fig. .
- Adjust parking brake shoe to .020 inch (.508 mm) less than drum measurement, Fig. .
- Reverse procedure to install.
E-Super Duty
E-250 w/Tension Limiter
- Loosen tension limiter nut to end of tension limiter threads.
- Depress brake pedal to last detent position (17 clicks).
- Measure and record exposed length of cinch strap, Fig. .
- Tighten tension limiter n...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Mariner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Mariner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Mariner cars and light trucks from 1990+.
Disc Brakes -> Description -> E-Series -> Edge & MKX -> Escape & Mariner -> Expedition & Navigator -> Explorer & Mountaineer -> Explorer Sport/Sport Trac -> F-150 & Mark LT -> F-Super Duty & Motorhome -> Freestar & Monterey -> Front -> Ranger -> Rear
Vehicle: 2008 Mercury Mariner Premier 3.0 V6 GAS
Edge & MKX
Front
When mechanical force is applied by the driver to the brake pedal, the force is converted into hydraulic pressure by the master cylinder. The hydraulic force is directed to the front disc brake calipers and transferred to the brake pads. The brake pads are then forced against the brake friction surfaces by the brake caliper pistons. The friction of the brake pads on the brake disc causes the slowing of wheel rotation and the vehicle. Fig. .
Rear
When mechanical force is applied by the driver to the brake pedal, the force is converted into hydraulic pressure by the maste...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Mariner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Mercury Mariner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Mercury Mariner cars and light trucks from 1990+.
Disc Brakes -> Precautions
Vehicle: 2008 Mercury Mariner 2.3 L4 GAS
Do not spill brake fluid on painted surfaces. If brake fluid is spilled on surfaces, wash off immediately.
Always inspect brake fluid level prior to servicing brake system If brake fluid level...
CLICK HERE TO GET FULL ACCESS TO 2008 Mercury Mariner BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Mercury Mariner vehicle.
|
| Access the Complete guide! |
