Auto Parts Search
We have info for following modifications of 2008 Mazda RX-8
- 2008 Mazda RX-8 Touring 1.3 R2 GAS, CC:1308, Fuel Injection
- 2008 Mazda RX-8 Sport 1.3 R2 GAS, CC:1308, Fuel Injection
- 2008 Mazda RX-8 Grand Touring 1.3 R2 GAS, CC:1308, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Mazda RX-8 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Mazda RX-8 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Mazda RX-8 Sport 1.3 R2 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
Removing driveshaft with joint shaft bracket installed may cause deformation of joint shaft bracket. Remove and install driveshaft and joint shaft as a component.
- Raise and support vehicle and sup...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda RX-8 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Mazda RX-8 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Mazda RX-8 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Mazda RX-8 Grand Touring 1.3 R2 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
Removing driveshaft with joint shaft bracket installed may cause deformation of joint shaft bracket. Remove and install driveshaft and joint shaft as a component.
- Raise and support vehicle and sup...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda RX-8 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Mazda RX-8 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Mazda RX-8 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Mazda RX-8 Touring 1.3 R2 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
Removing driveshaft with joint shaft bracket installed may cause deformation of joint shaft bracket. Remove and install driveshaft and joint shaft as a component.
- Raise and support vehicle and sup...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda RX-8 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Mazda RX-8 vehicle. |
Access the Complete guide! |