Auto Parts Search
2008 Mazda CX-9 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Mazda REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Mazda CX-9 AUTOMOBILES
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2008 Mazda CX-9 Grand Touring 3.7 V6 GAS
Front
- Place transmission in neutral, and raise and support vehicle.
- Mark front companion flange to front driveline.
- Mark transfer case companion flange to front driveline.
- Remove front driveline shaft to transfer case bolts and retainers.
- Remove front driveline shaft-to-front axle bolts.
- Remove driveline.
- Reverse procedure to install, noting the following:
- Torquefront driveline transfer case bolts to 13 ft. lbs.
Rear
- Place transmission...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Mazda CX-9 AUTOMOBILES
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Mazda CX-9 Touring 3.7 V6 GAS
Refer to Figs. and for wir...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 Mazda CX-9 AUTOMOBILES
Alternator, Replace
Vehicle: 2008 Mazda CX-9 Grand Touring 3.7 V6 GAS
- Disconnect battery ground cable at battery.
- Drain engine coolant into a suitable container.
- Remove air cleaner and fresh air duct component.
- Remove cooling fan component.
- Remove righthand front splash shield.
- Rem...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2008 Mazda CX-9 AUTOMOBILES
Cabin Air Filter Service -> Mazda -> 2007-09 CX9
Vehicle: 2008 Mazda CX-9 Touring 3.7 V6 GAS
Under normal operating conditions the cabin air filter should be replaced every 24 months or 25,000 miles. In dusty areas change the cabin air filter more often.
- Open the glove compartment.
- Remove the glove compar...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Mazda CX-9 AUTOMOBILES
Mazda -> Automatic Transaxle Warning Lamp ->
Vehicle: 2008 Mazda CX-9 Touring 3.7 V6 GAS
This lamp should light for approximately 6-8 seconds when the ignition is turned to On position as a bulb check. If the warning lamp flashes or lights, the tran...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Mazda CX-9 AUTOMOBILES
Heater Hose, Replace -> Bypass -> Front -> Inlet -> Outlet -> Rear
Vehicle: 2008 Mazda CX-9 Grand Touring 3.7 V6 GAS
Inlet
Front
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at heater pipe.
- Remove hose from heater pipe.
- Remove hose from vehicle.
- Reverse procedure to install.
Rear
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at heater pipe.
- Remove hose from heater pipe.
- Remove hose from v...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2008 Mazda CX-9 AUTOMOBILES
Serpentine Drive Belt, Replace -> Alternator & A/C Compressor Drive Belt -> Power Steering Pump Drive Belt
Vehicle: 2008 Mazda CX-9 Grand Touring 3.7 V6 GAS
Alternator & A/C Compressor Drive Belt
- Remove engine cover.
- Raise and support vehicle.
- Remove right front wheel and tire.
- Remove right splash shield.
- Rotate belt tensioner clockwise, using a suitable breaker bar to relieve tension from drive belt.
- Remove drive belt.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts 80-108 ft. lbs.
Power Steering Pump Drive Belt
- Remove alternator and A/C Compressor Drive Belt.
- ...
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 2008 Mazda CX-9 AUTOMOBILES
Component location diagrams for most 2008 Mazda CX-9 cars and light trucks sold in the U.S. from 1990+.
Instrument Panel Harness Diagram for 2008 Mazda CX-9 Sport 3.7 V6 GAS Components on diagram: |
Rear Body Harness Diagram for 2008 Mazda CX-9 Touring 3.7 V6 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 2008 Mazda CX-9 AUTOMOBILES
OEM drawn wiring diagrams for most 2008 Mazda CX-9 cars and light trucks sold in the U.S.
2008 Mazda CX-9 Touring 3.7 V6 GAS Wiring Diagram Components on diagram: |
2008 Mazda CX-9 Grand Touring 3.7 V6 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 2008 Mazda CX-9 AUTOMOBILES
OEM TSB listings for most 2008 Mazda CX-9 cars and light trucks sold in the U.S. from 1985+.
Document: DRIVER-SIDE MIRROR VIBRATION WHEN DRIVING ON ROUGH ROAD Vehicle: 2008 Mazda CX-9 Touring 3.7 V6 GAS |
Document: REAR QUARTER GLASS REPLACEMENT PRECAUTION Vehicle: 2008 Mazda CX-9 Touring 3.7 V6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2008 Mazda CX-9 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2008 Mazda CX-9 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2008 Mazda CX-9 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2008 Mazda CX-9 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2008 Mazda CX-9 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2008 Mazda CX-9 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Mazda CX-9 vehicle. |
Access the Complete guide! |