Auto Parts Search
We have info for following modifications of 2008 Land Rover Range Rover Sport
- 2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS, CC:4394, Fuel Injection, Engine VIN:, Desg:5
- 2008 Land Rover Range Rover Sport Supercharged 4.2 V8 GAS, CC:4196, Fuel Injection, Engine VIN:, Desg:3
- 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS, CC:4196, Fuel Injection, Engine VIN:, Desg:3
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Land Rover Range Rover Sport cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS
Front
- Position vehicle on lift.
- Select NEUTRAL in the main gearbox.
- Raise vehicle on lift.
- Raise one front wheel to allow propeller shaft to rotate.
- Reference mark propeller shaft and differential to aid reassembly.
- Remove 6 nuts and bolts securing drive flange and propeller shaft to coupling. Discard locking nuts.
- Pull propeller shaft forwards and remove coupling and centering flange.
- Remove propeller shaft.
- Remove and discard O-ring from differential output drive tube.
- Reverse procedure to install, noting the following:
- Lubricate and install new O-ring.
- Align reference marks.
- Check and...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Land Rover Range Rover Sport cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2008 Land Rover Range Rover Sport Supercharged 4.2 V8 GAS
Front
Remove
- Raise and support front of vehicle.
- Remove wheel and tire assembly.
- If removing righthand drive shaft, remove nuts securing anti-roll bar links and remove links from anti-roll bar. Use an open-ended wrench on flats provided to prevent ball joint rotating.
- For all drive shafts, remove drive shaft hub nut stake.
- With an assistant applying brakes, remove and discard drive shaft hub nut.
- Remove brake disc.
- Release ABS sensor lead from clip.
- Release sensor lead from damper, remove Allen screw and release ABS sensor from hub.
- Remove and discard nut securing track rod ball jo...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Land Rover Range Rover Sport cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 2008 Land Rover Range Rover Sport Supercharged 4.2 V8 GAS
Front
- Position vehicle on lift.
- Select NEUTRAL in the main gearbox.
- Raise vehicle on lift.
- Raise one front wheel to allow propeller shaft to rotate.
- Reference mark propeller shaft and differential to aid reassembly.
- Remove 6 nuts and bolts securing drive flange and propeller shaft to coupling. Discard locking nuts.
- Pull propeller shaft forwards and remove coupling and centering flange.
- Remove propeller shaft.
- Remove and discard O-ring from differential output drive tube.
- Reverse procedure to install, noting the following:
- Lubricate and install new O-ring.
- Align reference marks.
- Check and...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Land Rover Range Rover Sport cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Install -> Rear -> Remove
Vehicle: 2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS
Front
- Position vehicle on lift.
- Select NEUTRAL in the main gearbox.
- Raise vehicle on lift.
- Raise one front wheel to allow propeller shaft to rotate.
- Reference mark propeller shaft and differential to aid reassembly.
- Remove 6 nuts and bolts securing drive flange and propeller shaft to coupling. Discard locking nuts.
- Pull propeller shaft forwards and remove coupling and centering flange.
- Remove propeller shaft.
- Remove and discard O-ring from differential output drive tube.
- Reverse procedure to install, noting the following:
- Lubricate and install new O-ring.
- Align reference marks.
- Check and...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Land Rover Range Rover Sport cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2008 Land Rover Range Rover Sport HSE 4.4 V8 GAS
Front
Remove
- Raise and support front of vehicle.
- Remove wheel and tire assembly.
- If removing righthand drive shaft, remove nuts securing anti-roll bar links and remove links from anti-roll bar. Use an open-ended wrench on flats provided to prevent ball joint rotating.
- For all drive shafts, remove drive shaft hub nut stake.
- With an assistant applying brakes, remove and discard drive shaft hub nut.
- Remove brake disc.
- Release ABS sensor lead from clip.
- Release sensor lead from damper, remove Allen screw and release ABS sensor from hub.
- Remove and discard nut securing track rod ball jo...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Land Rover Range Rover Sport AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Land Rover Range Rover Sport cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2008 Land Rover Range Rover Sport LE 4.2 V8 GAS
Front
Remove
- Raise and support front of vehicle.
- Remove wheel and tire assembly.
- If removing righthand drive shaft, remove nuts securing anti-roll bar links and remove links from anti-roll bar. Use an open-ended wrench on flats provided to prevent ball joint rotating.
- For all drive shafts, remove drive shaft hub nut stake.
- With an assistant applying brakes, remove and discard drive shaft hub nut.
- Remove brake disc.
- Release ABS sensor lead from clip.
- Release sensor lead from damper, remove Allen screw and release ABS sensor from hub.
- Remove and discard nut securing track rod ball jo...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover Range Rover Sport DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Land Rover Range Rover Sport vehicle. |
Access the Complete guide! |