Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 GMC Acadia car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 GMC Acadia automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 GMC Acadia
- 2008 GMC Acadia SLT 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
- 2008 GMC Acadia SLE 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 GMC Acadia AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 GMC Acadia cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 GMC Acadia SLT 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove left catalytic convertor.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Disconnect engine wiring harness electrical connector from heated oxygen sensor electrical connector.
- Remove HO2S electrical connector retainer from engine wiring harness clip.
- Remove exhaust manifold heat shield bolts and heat shield.
- Remove frame brace bolts and brace.
- Disconnect heated oxygen sensor electrical connector from engine wiring harness electrical connector.
- Remove catalytic converter hanger clamp nut, if required.
- Remove catalytic convert...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Acadia STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 GMC Acadia AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 GMC Acadia cars and light trucks from 1990+.
Alternator, Replace -> First Design -> Second Design
Vehicle: 2008 GMC Acadia SLT 3.6 V6 GAS
First Design
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove drive belt using a suitable tool.
- Lower vehicle.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Remove engine mount strut bolt.
- Remove engine mount strut bracket bolt, then engine mount strut bracket.
- Remove air conditioning liquid line clamp bolt from upper radiator support.
- Remove reservoir tabs from upper radiator support, position reservoir out of way.
- Reposition battery positive junction block cable boot.
- Remove battery positive junction block cable to alternator nut.
- Remove batte...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Acadia STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 GMC Acadia AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 GMC Acadia cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2008 GMC Acadia SLE 3.6 V6 GAS
- Disconnect battery ground cable.
- Remove left catalytic convertor.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Disconnect engine wiring harness electrical connector from heated oxygen sensor electrical connector.
- Remove HO2S electrical connector retainer from engine wiring harness clip.
- Remove exhaust manifold heat shield bolts and heat shield.
- Remove frame brace bolts and brace.
- Disconnect heated oxygen sensor electrical connector from engine wiring harness electrical connector.
- Remove catalytic converter hanger clamp nut, if required.
- Remove catalytic convert...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Acadia STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2008 GMC Acadia AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2008 GMC Acadia cars and light trucks from 1990+.
Alternator, Replace -> First Design -> Second Design
Vehicle: 2008 GMC Acadia SLE 3.6 V6 GAS
First Design
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove drive belt using a suitable tool.
- Lower vehicle.
- Remove oil fill cap, then fuel injector sight shield from ball studs.
- Remove engine mount strut bolt.
- Remove engine mount strut bracket bolt, then engine mount strut bracket.
- Remove air conditioning liquid line clamp bolt from upper radiator support.
- Remove reservoir tabs from upper radiator support, position reservoir out of way.
- Reposition battery positive junction block cable boot.
- Remove battery positive junction block cable to alternator nut.
- Remove batte...
CLICK HERE TO GET FULL ACCESS TO 2008 GMC Acadia STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 GMC Acadia vehicle.
|
| Access the Complete guide! |
