Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Audi TT car and truck
repair procedures including Audi engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Audi TT automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Audi TT
- 2008 Audi TT 2.0 L4 GAS, CC:1984, CID:121, Fuel Injection, Aspiration:121
- 2008 Audi TT 2.0 L4 GAS, CC:1984, CID:121, Fuel Injection, Aspiration:121
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Audi TT AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Audi TT cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Audi TT 2.0 L4 GAS
The wheel bearings must not be loaded when the hub nut/hex bolt is loose. If the bearings are loaded by the vehicle's own weight the bearing will be damaged. The wheel bearings will be stressed and the life expectancy reduced.
If a vehicle that has an axle shaft removed is to be moved, an outer CV joint must be installed in place of the axle shaft and be tightened to 37 ft. lbs. otherwise the wheel bearing will be damaged.
- Loosen driveshaft collar bolt only 90°, so as to not damage wheel bearing. Vehicle must be standing on its wheels when loosening and tightening collar bo...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi TT DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Audi TT AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Audi TT cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2008 Audi TT 2.0 L4 GAS
The wheel bearings must not be loaded when the hub nut/hex bolt is loose. If the bearings are loaded by the vehicle's own weight the bearing will be damaged. The wheel bearings will be stressed and the life expectancy reduced.
If a vehicle that has an axle shaft removed is to be moved, an outer CV joint must be installed in place of the axle shaft and be tightened to 37 ft. lbs. otherwise the wheel bearing will be damaged.
- Loosen driveshaft collar bolt only 90°, so as to not damage wheel bearing. Vehicle must be standing on its wheels when loosening and tightening collar bo...
CLICK HERE TO GET FULL ACCESS TO 2008 Audi TT DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Audi TT vehicle.
|
| Access the Complete guide! |
