Auto Parts Search
We have info for following modifications of 2006 Saab 9-3
- 2006 Saab 9-3 Aero 2.8 V6 GAS, CC:2792, CID:170, Fuel Injection, Aspiration:170, Engine VIN:, Desg:U
- 2006 Saab 9-3 2.0T 2.0 L4 GAS, CC:1985, Fuel Injection, Engine VIN:, Desg:Y
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Saab 9-3 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Saab 9-3 Aero 2.8 V6 GAS
- Remove battery cover.
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove mounting bolt, nut, and front torque arm.
- Remove bolts and secondary air pump with bracket and move aside.
- Remove electrical connections at s...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Saab 9-3 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Saab 9-3 2.0T 2.0 L4 GAS
- Remove battery cover.
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove electrical connections at starter...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Saab 9-3 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Saab 9-3 2.0T 2.0 L4 GAS
- Remove battery cover.
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove lower engine cover.
- Place a suitable container under vehicle, connect a hose to radiator and drain coolant.
- Remove right front wheel.
- Remove right wheelhouse liner.
- If drive belt is to be reused, mark direction of rotation.
- Rotate belt tensioner, using a suitable tool to relieve tension from drive belt.
- Remove drive belt.
- Lower vehicle.
- Remove upper engine cover.
- Disconnect connectors from engine control module.
- Remove engine control module.
- Disconnect intak...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Saab 9-3 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Saab 9-3 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Saab 9-3 Aero 2.8 V6 GAS
- Remove battery cover.
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove right front wheel.
- Remove right wheelhouse liner.
- If drive belt is to be reused, mark direction of rotation.
- Rotate belt tensioner, using a suitable tool to relieve tension from drive belt.
- Remove drive belt.
- Remove bolt from steering swivel member, lower suspension arm, and place a suitable wedge between suspension arm and anti-roll bar.
- Tap drive shaft out of intermediate shaft with a suitable brass drift and large hammer then, move aside drive shaft. Use protective goggles to protect against f...
CLICK HERE TO GET FULL ACCESS TO 2006 Saab 9-3 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Saab 9-3 vehicle. |
Access the Complete guide! |