Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Nissan Frontier car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Nissan Frontier automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Nissan Frontier
- 2006 Nissan Frontier XE 2.5 L4 GAS, CC:2500, Fuel Injection
- 2006 Nissan Frontier LE 4.0 V6 GAS, CC:3954, Fuel Injection
- 2006 Nissan Frontier Nismo OFF-ROAD 4.0 V6 GAS, CC:3954, Fuel Injection
- 2006 Nissan Frontier SE 4.0 V6 GAS, CC:3954, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Frontier AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Frontier cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Frontier Nismo OFF-ROAD 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove undercover using suitable tool.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 80 ft. lbs.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Frontier DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Frontier AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Frontier cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Frontier LE 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove undercover using suitable tool.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 80 ft. lbs.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Frontier DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Frontier AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Frontier cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassemble
Vehicle: 2006 Nissan Frontier XE 2.5 L4 GAS
Disassemble
This procedure describes a driveline equipped with cardan joint in tube yoke. Driveline equipped with companion/slip yoke repeat steps to remove remaining cardan joint.
- Place driveshaft on suitable workbench. Do not damage driveshaft when servicing on workbench. Ensure driveline and components are reference marked to prevent driveline imbalance.
- Tap outside of bearing cap with a drift to loosen snap ring.
- Remove snap rings from both sides of yoke using suitable tool.
- Position yoke with grease fitting pointing up, if equipped.
- Position socket with an inside diam...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Frontier DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Frontier AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Frontier cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Frontier SE 4.0 V6 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove undercover using suitable tool.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 80 ft. lbs.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Frontier DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Frontier AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Frontier cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Nissan Frontier XE 2.5 L4 GAS
Front
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove undercover using suitable tool.
- Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
- Remove bolts and then remove front driveline from front final drive and transfer case from vehicle.
- Reverse procedure to install, noting the following:
- Torque wheel lug nuts to 80 ft. lbs.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Frontier DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Nissan Frontier AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Nissan Frontier cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2006 Nissan Frontier XE 2.5 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove engine undercover bolts using suitable tool.
- Remove brake caliper torque member bolts using suitable tool. Position brake caliper aside and attach using mechanics wire.Do not press down on brake pedal while caliper is removed.
- Place alignment mark on brake disc, wheel hub and bearing assembly, then remove disc rotor.
- On models equipped with 4WD, remove cotter pin, then remove locknut from driveshaft using suitable tool.
- On all models, remove end of drive...
CLICK HERE TO GET FULL ACCESS TO 2006 Nissan Frontier DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Nissan Frontier vehicle.
|
| Access the Complete guide! |
