Auto Parts Search
We have info for following modifications of 2006 Mercury Milan
- 2006 Mercury Milan Premier 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2006 Mercury Milan Premier 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
- 2006 Mercury Milan 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:Z
- 2006 Mercury Milan 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183, Engine VIN:, Desg:1
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mercury Milan AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mercury Milan cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Mercury Milan 2.3 L4 GAS
- Disconnect battery ground cable.
- Remove bolt, nuts, and alternator upper air duct.
- Rotate accessory drive belt tensioner clockwise, then position accessory drive belt aside.
- Remove nuts and alternator shield.
- Press locking tabs and remove alternator intermediate air duct.
- Position alternator protective cover aside, remove nuts and position alt...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Milan STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mercury Milan AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mercury Milan cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Mercury Milan Premier 2.3 L4 GAS
The heavy gauge input lead connected to starter solenoid is hot at all times. Ensure protective cap is installed over terminal and is replaced after service.
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove underbody cover mounting screws, then cover.
- Remove starter motor solenoid wire nut and position wire aside.
- ...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Milan STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mercury Milan AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mercury Milan cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Mercury Milan Premier 2.3 L4 GAS
- Disconnect battery ground cable.
- Remove bolt, nuts, and alternator upper air duct.
- Rotate accessory drive belt tensioner clockwise, then position accessory drive belt aside.
- Remove nuts and alternator shield.
- Press locking tabs and remove alternator intermediate air duct.
- Position alternator protective cover aside, remove nuts and position alt...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Milan STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mercury Milan AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mercury Milan cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Mercury Milan Premier 3.0 V6 GAS
- Disconnect battery ground cable.
- Rotate or lift belt tensioner arm, using a suitable tool to relieve tension from drive belt.
- Remove accessory drive belt.
- Remove air conditioning compressor mounting bolts, then position compressor with lines attached aside.
- Remove mounting nut, then position engine control sensor wiring and hose bracket aside.
- Remove inboard upper alternator mountin...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Milan STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mercury Milan AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mercury Milan cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Mercury Milan 3.0 V6 GAS
The heavy gauge input lead connected to starter solenoid is hot at all times. Ensure protective cap is installed over terminal and is replaced after service.
- Disconnect battery ground cable.
- Remove air cleaner outlet pipe.
- Remove battery tray.
- Remove starter motor solenoi...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Milan STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Mercury Milan AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Mercury Milan cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Mercury Milan Premier 3.0 V6 GAS
The heavy gauge input lead connected to starter solenoid is hot at all times. Ensure protective cap is installed over terminal and is replaced after service.
- Disconnect battery ground cable.
- Remove air cleaner outlet pipe.
- Remove battery tray.
- Remove starter motor solenoi...
CLICK HERE TO GET FULL ACCESS TO 2006 Mercury Milan STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Mercury Milan vehicle. |
Access the Complete guide! |