Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Mazda B3000 car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Mazda B3000 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Mazda B3000
- 2006 Mazda B3000 3.0 V6 GAS, CC:2954, Fuel Injection, Engine VIN:, Desg:U
- 2006 Mazda B3000 DS 3.0 V6 GAS, CC:2954, Fuel Injection, Engine VIN:, Desg:U
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Mazda B3000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Mazda B3000 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassemble
Vehicle: 2006 Mazda B3000 3.0 V6 GAS
- Ensure vehicle transmission is in neutral.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove hub nut and washer and discard. Do not allow disc brake caliper to suspend freely from brake hose. Support caliper using mechanics wire.
- Remove front disc brake caliper, anchor plate, and pads as an assembly and position assembly aside.
- Remove brake disc. Do not use a hammer to separate outboard CV joint from wheel hub. Damage to outboard CV joint stub shaft threads and internal CV joint components may result.
- Se...
CLICK HERE TO GET FULL ACCESS TO 2006 Mazda B3000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Mazda B3000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Mazda B3000 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Mazda B3000 DS 3.0 V6 GAS
- Ensure vehicle transmission is in neutral.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove hub nut and washer and discard. Do not allow disc brake caliper to suspend freely from brake hose. Support caliper using mechanics wire.
- Remove front disc brake caliper, anchor plate, and pads as an assembly and position assembly aside.
- Remove brake disc. Do not use a hammer to separate outboard CV joint from wheel hub. Damage to outboard CV joint stub shaft threads and internal CV joint components may result.
- Se...
CLICK HERE TO GET FULL ACCESS TO 2006 Mazda B3000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Mazda B3000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Mazda B3000 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2006 Mazda B3000 3.0 V6 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- On models equipped with manual transaxle, drain transaxle oil in suitable contai...
CLICK HERE TO GET FULL ACCESS TO 2006 Mazda B3000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Mazda B3000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Mazda B3000 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Mazda B3000 3.0 V6 GAS
- Ensure vehicle transmission is in neutral.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove hub nut and washer and discard. Do not allow disc brake caliper to suspend freely from brake hose. Support caliper using mechanics wire.
- Remove front disc brake caliper, anchor plate, and pads as an assembly and position assembly aside.
- Remove brake disc. Do not use a hammer to separate outboard CV joint from wheel hub. Damage to outboard CV joint stub shaft threads and internal CV joint components may result.
- Se...
CLICK HERE TO GET FULL ACCESS TO 2006 Mazda B3000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Mazda B3000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Mazda B3000 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2006 Mazda B3000 DS 3.0 V6 GAS
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- On models equipped with manual transaxle, drain transaxle oil in suitable contai...
CLICK HERE TO GET FULL ACCESS TO 2006 Mazda B3000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Mazda B3000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Mazda B3000 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassemble
Vehicle: 2006 Mazda B3000 DS 3.0 V6 GAS
- Ensure vehicle transmission is in neutral.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove hub nut and washer and discard. Do not allow disc brake caliper to suspend freely from brake hose. Support caliper using mechanics wire.
- Remove front disc brake caliper, anchor plate, and pads as an assembly and position assembly aside.
- Remove brake disc. Do not use a hammer to separate outboard CV joint from wheel hub. Damage to outboard CV joint stub shaft threads and internal CV joint components may result.
- Se...
CLICK HERE TO GET FULL ACCESS TO 2006 Mazda B3000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Mazda B3000 vehicle.
|
| Access the Complete guide! |
