Auto Parts Search
We have info for following modifications of 2006 KIA Optima
- 2006 KIA Optima LX 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:6
- 2006 KIA Optima EX 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:6
- 2006 KIA Optima LX 2.4 L4 GAS, CC:2359, Fuel Injection, Engine VIN:, Desg:3
- 2006 KIA Optima EX 2.4 L4 GAS, CC:2359, Fuel Injection, Engine VIN:, Desg:3
- 2006 KIA Optima LX 2.7 V6 GAS, CC:2656, Fuel Injection, Engine VIN:, Desg:8
- 2006 KIA Optima EX 2.7 V6 GAS, CC:2656, Fuel Injection, Engine VIN:, Desg:8
- 2006 KIA Optima LX 2.7 V6 GAS, CC:2656, Fuel Injection, Engine VIN:, Desg:4
- 2006 KIA Optima EX 2.7 V6 GAS, CC:2656, Fuel Injection, Engine VIN:, Desg:4
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 KIA Optima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 KIA Optima cars and light trucks sold in the U.S. from 1990+.
Kia -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2006 KIA Optima EX 2.7 V6 GAS
The MIL will be illuminated when the ignition switch is in the On position and the engine is not running. When the engine is started, the lamp should go off. If it remains lit, a diagnostic trouble code has been stored.On models less OBD II, after diagnosis and repair are complete, place ignition switch in off position, then clear stored diagnostic trouble codes by disconnecting the battery ground cable for at least 20 seconds. On models equipped with OBD II, following diagnosis and repair of the system, the lamp may be turned off using a suita...
CLICK HERE TO GET FULL ACCESS TO 2006 KIA Optima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 KIA Optima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 KIA Optima cars and light trucks sold in the U.S. from 1990+.
Kia -> Electronic Stability Control (ESC)/Electronic Stability Program (ESP) Off Warning Lamp -> 2006-09 Optima
Vehicle: 2006 KIA Optima EX 2.7 V6 GAS
The ESC/ESP warning lamp will be illuminated for 3 seconds when the ignition switch is placed in the on position but should go out when the self-diagnostic system determines that the system is functioning properly. The lamp will illuminate when the ESC/ESP is switched off by de...
CLICK HERE TO GET FULL ACCESS TO 2006 KIA Optima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 KIA Optima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 KIA Optima cars and light trucks sold in the U.S. from 1990+.
Kia -> Tire Pressure Monitoring System (System) Warning Indicator -> 2006-09 Optima -> Relearn -> Reset -> Tire Pressure Sensor Initiation -> TPMS Receiver
Vehicle: 2006 KIA Optima EX 2.7 V6 GAS
Reset
The Low Tire Pressure Warning lamp will illuminate for approximately three seconds as a bulb check when the ignition switch is placed in the On position. This system uses radio frequency pressure sensors which monitor pressure in all 4 tires. When operating the vehicle at a speed above 20 mph the Low Tire Pressure Warning Lamp will illuminate when low tire pressure has been detected. Adjusting tires to correct pressure will turn lamp off.
Relearn
Tire Pressure Sensor Initiation
- Using Kia TPMS exciter tool, or equivalent, read the four tire pressure sensor IDs starting with sens...
CLICK HERE TO GET FULL ACCESS TO 2006 KIA Optima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 KIA Optima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 KIA Optima cars and light trucks sold in the U.S. from 1990+.
Kia -> Traction Control System (TCS) Warning Lamp ->
Vehicle: 2006 KIA Optima EX 2.4 L4 GAS
The TCS warning lamp, will illuminate for 2-4 seconds when the ignition switch is placed in the on position to indicate the warning lamp is operational. The lamp should go off after the 2-4 seconds has elapsed. If the warning lamp remains ...
CLICK HERE TO GET FULL ACCESS TO 2006 KIA Optima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 KIA Optima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 KIA Optima cars and light trucks sold in the U.S. from 1990+.
Kia -> Anti-Lock Brake System Warning Lamp -> Amanti, Optima, Rio, Sedona, Sorento & Spectra
Vehicle: 2006 KIA Optima LX 2.7 V6 GAS
The Anti-Lock Brake (ABS) System warning lamp, will illuminate for 2-4 seconds when the ignition switch is placed in the on position to indicate the warning lamp is operational. The lamp should go off after the 2-4 seconds has elapsed. If the warning lamp remain...
CLICK HERE TO GET FULL ACCESS TO 2006 KIA Optima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 KIA Optima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 KIA Optima cars and light trucks sold in the U.S. from 1990+.
Kia -> Anti-Lock Brake System Warning Lamp -> Amanti, Optima, Rio, Sedona, Sorento & Spectra
Vehicle: 2006 KIA Optima LX 2.4 L4 GAS
The Anti-Lock Brake (ABS) System warning lamp, will illuminate for 2-4 seconds when the ignition switch is placed in the on position to indicate the warning lamp is operational. The lamp should go off after the 2-4 seconds has elapsed. If the warning lamp remain...
CLICK HERE TO GET FULL ACCESS TO 2006 KIA Optima MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 KIA Optima vehicle. |
Access the Complete guide! |