Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Dodge Charger car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Dodge Charger automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Dodge Charger
- 2006 Dodge Charger 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
- 2006 Dodge Charger SXT 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:G
- 2006 Dodge Charger SE 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:G
- 2006 Dodge Charger R/T 5.7 V8 GAS, CID:345, Fuel Injection, Aspiration:345, Engine VIN:, Desg:H
- 2006 Dodge Charger Daytona R/T 5.7 V8 GAS, CID:345, Fuel Injection, Aspiration:345, Engine VIN:, Desg:H
- 2006 Dodge Charger SRT8 6.1 V8 GAS, CC:6059, CID:370, Fuel Injection, Aspiration:370, Engine VIN:, Desg:W
BRAKE SERVICE PROCEDURES FOR 2006 Dodge Charger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Dodge Charger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Master Cylinder
Vehicle: 2006 Dodge Charger R/T 5.7 V8 GAS
Master Cylinder
The master cylinder is a center valve master cylinder used for all applications. The brake fluid reservoir mounted on top and brake fluid level switch is mounted on the side of the reservoir.
The reservoir is indexed to prevent installation in the wrong direction. The cap diaphragm is slit to allow atmospheric pressure to equalize on both sides of diaphragm.
The primary and secondary outlet tubes of the master cylinder are connected to a junction block on non-ABS equipped vehicles. The master cylinder primary ...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Charger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Dodge Charger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Dodge Charger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake Control Specifications
Vehicle: 2006 Dodge Charger SE 3.5 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Charger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Dodge Charger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Dodge Charger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Anti-Lock Brake System -> Caliber & 2007 Sebring Sedan -> Charger, Magnum & 300 -> Concorde, Intrepid & 300M -> Crossfire -> Except Caliber & 2007 Sebring Sedan -> Fluid Reservoir -> Hydraulic Control Unit -> Junction Block -> Less Anti-Lock Brake System -> Master Cylinder -> Neon -> Proportioning Valve -> Sebring Convertible, Stratus Sedan & 2004-06 Sebring Sedan -> Sebring Coupe & Stratus Coupe -> With ABS -> With Anti-Lock Brake System -> Without ABS
Vehicle: 2006 Dodge Charger SXT 3.5 V6 GAS
Fluid Reservoir
Caliber & 2007 Sebring Sedan
- Clean master cylinder housing and brake fluid reservoir.
- Remove brake fluid reservoir cap, then siphon as much brake fluid as possible from reservoir.
- Remove reservoir to master cylinder mounting screws.
- Pull reservoir straight up to remove from master cylinder.
- Remove brake fluid switch from reservoir.
- Reverse procedure to install.
Except Caliber & 2007 Sebring Sedan
These models use ISO style flares that are of metric dimension. Use ISO style tubing flares and metric tubing when performing any repairs.
- Remove reservoir caps.
- Remove reser...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Charger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Dodge Charger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Dodge Charger cars and light trucks from 1990+.
Disc Brakes -> Charger, Magnum & 300 -> Parking Brake Service -> Shoe
Vehicle: 2006 Dodge Charger SRT8 6.1 V8 GAS
Shoe
- Raise and support vehicle, then remove tire and wheel assembly.
- While helper applies brakes, remove hub nut from half shaft.
- Remove two mounting bolts, disc brake caliper and adapter. Suspend assembly aside using suitable wire or bungee cord. Do not overextend brake hose.
- Remove clips and brake rotor.
- Loosen each hub and bearing mounting bolt 1-2 turns at a time while pulling outward on hub and bearing.
- Once removed from threads in hub and bearing, but not knuc...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Charger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Dodge Charger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Dodge Charger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing -> ABS -> Concorde, Intrepid & 300M -> Crossfire -> Less Anti-Lock Brake System -> Neon -> Non-ABS -> Proportioning Valve -> Sebring Coupe & Stratus Coupe -> With Anti-Lock Brake System
Vehicle: 2006 Dodge Charger 2.7 V6 GAS
Proportioning Valve
Concorde, Intrepid & 300M
ABS
These models with ABS do not have proportioning valves to test, they use Electronic Variable Brake Proportioning which is built into the Integrated Control Unit (ICU).
Non-ABS
- If lefthand rear proportioning valve is suspect,disconnect tube nut fitting at master cylinder primary port (port closest to power brake booster) and install adapter tool No. 8494-2, or equivalent, in its place on master cylinder.
- If the righthand rear proportioning valve is suspect, disconnect tube nut fitting at master cylinder secondary port (port furthest...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Charger BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2006 Dodge Charger AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2006 Dodge Charger cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing -> ABS -> Concorde, Intrepid & 300M -> Crossfire -> Less Anti-Lock Brake System -> Neon -> Non-ABS -> Proportioning Valve -> Sebring Coupe & Stratus Coupe -> With Anti-Lock Brake System
Vehicle: 2006 Dodge Charger SRT8 6.1 V8 GAS
Proportioning Valve
Concorde, Intrepid & 300M
ABS
These models with ABS do not have proportioning valves to test, they use Electronic Variable Brake Proportioning which is built into the Integrated Control Unit (ICU).
Non-ABS
- If lefthand rear proportioning valve is suspect,disconnect tube nut fitting at master cylinder primary port (port closest to power brake booster) and install adapter tool No. 8494-2, or equivalent, in its place on master cylinder.
- If the righthand rear proportioning valve is suspect, disconnect tube nut fitting at master cylinder secondary port (port furthest...
CLICK HERE TO GET FULL ACCESS TO 2006 Dodge Charger BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Dodge Charger vehicle.
|
| Access the Complete guide! |
