Auto Parts Search
We have info for following modifications of 2006 Chevrolet Silverado 3500
- 2006 Chevrolet Silverado 3500 WT 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2006 Chevrolet Silverado 3500 WT 8.1 V8 GAS, CID:496, Fuel Injection, Aspiration:496, Engine VIN:, Desg:G
- 2006 Chevrolet Silverado 3500 WT 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:2
- 2006 Chevrolet Silverado 3500 WT 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:D
- 2006 Chevrolet Silverado 3500 LT 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2006 Chevrolet Silverado 3500 LT 8.1 V8 GAS, CID:496, Fuel Injection, Aspiration:496, Engine VIN:, Desg:G
- 2006 Chevrolet Silverado 3500 LT 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:2
- 2006 Chevrolet Silverado 3500 LT 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:D
- 2006 Chevrolet Silverado 3500 LS 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2006 Chevrolet Silverado 3500 LS 8.1 V8 GAS, CID:496, Fuel Injection, Aspiration:496, Engine VIN:, Desg:G
- 2006 Chevrolet Silverado 3500 LS 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:2
- 2006 Chevrolet Silverado 3500 LS 6.6 V8 DIESEL, CID:400, Fuel Injection, Aspiration:400, Engine VIN:, Desg:D
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Silverado 3500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Silverado 3500 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2006 Chevrolet Silverado 3500 LT 6.6 V8 DIESEL
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Silverado 3500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Silverado 3500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Silverado 3500 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Chevrolet Silverado 3500 LT 6.6 V8 DIESEL
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include the propeller shafts, wheel drive shafts, pinion flanges and output shafts
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up ex...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Silverado 3500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Silverado 3500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Silverado 3500 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Chevrolet Silverado 3500 WT 6.6 V8 DIESEL
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include the propeller shafts, wheel drive shafts, pinion flanges and output shafts
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up ex...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Silverado 3500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Silverado 3500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Silverado 3500 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2006 Chevrolet Silverado 3500 WT 6.6 V8 DIESEL
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Silverado 3500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Silverado 3500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Silverado 3500 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2006 Chevrolet Silverado 3500 LS 6.0 V8 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Silverado 3500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Chevrolet Silverado 3500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2006 Chevrolet Silverado 3500 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2006 Chevrolet Silverado 3500 LS 6.0 V8 GAS
Front
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include the propeller shafts, wheel drive shafts, pinion flanges and output shafts
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.
- Raise and support vehicle.
- Remove transfer case shield, if equipped.
- If equipped with double clamp style boot, remove clamp at transfer case by prying up ex...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Silverado 3500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Chevrolet Silverado 3500 vehicle. |
Access the Complete guide! |