Auto Parts Search
We have info for following modifications of 2006 Chevrolet Colorado
- 2006 Chevrolet Colorado LT 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2006 Chevrolet Colorado LT 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2006 Chevrolet Colorado LS 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2006 Chevrolet Colorado WT 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2006 Chevrolet Colorado WT 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Chevrolet Colorado AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Chevrolet Colorado cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Chevrolet Colorado LS 2.8 L4 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove st...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Colorado STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Chevrolet Colorado AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Chevrolet Colorado cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Chevrolet Colorado WT 2.8 L4 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove st...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Colorado STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Chevrolet Colorado AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Chevrolet Colorado cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Chevrolet Colorado LT 2.8 L4 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove st...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Colorado STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Chevrolet Colorado AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Chevrolet Colorado cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Chevrolet Colorado WT 3.5 L5 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Raise and support vehicle, then remove left front wheel and tire assembly.
- Remove left wheelhouse liner.
- Disengage air conditioning compressor electrical connector from bracket.
- Remove lower air conditioning compressor mounting bolts, leave upper mounting bolt with air conditioning compressor.
- Lower vehicle.
- Remove alternator output battery t...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Colorado STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Chevrolet Colorado AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Chevrolet Colorado cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2006 Chevrolet Colorado LT 3.5 L5 GAS
Upon removal of starter, note if any shims are used. If shims are used, they should be installed in their original locations. After installation, if starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after firing, add .015 inch double shims until noise ceases.
- Disconnect battery ground cable.
- Remove intake manifold.
- Remove sta...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Colorado STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Chevrolet Colorado AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2006 Chevrolet Colorado cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2006 Chevrolet Colorado WT 2.8 L4 GAS
- Disconnect battery ground cable.
- Remove drive belt.
- Raise and support vehicle, then remove left front wheel and tire assembly.
- Remove left wheelhouse liner.
- Disengage air conditioning compressor electrical connector from bracket.
- Remove lower air conditioning compressor mounting bolts, leave upper mounting bolt with air conditioning compressor.
- Lower vehicle.
- Remove alternator output battery ter...
CLICK HERE TO GET FULL ACCESS TO 2006 Chevrolet Colorado STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Chevrolet Colorado vehicle. |
Access the Complete guide! |