Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Pontiac Grand AM car and truck
repair procedures including Pontiac engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Pontiac Grand AM automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2005 Pontiac Grand AM
- 2005 Pontiac Grand AM GT 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:E
- 2005 Pontiac Grand AM SE 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:E
- 2005 Pontiac Grand AM SE 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
- 2005 Pontiac Grand AM GT1 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:E
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Pontiac Grand AM SE 3.4 V6 GAS
- Select park/1st gear position in transmission and apply park brake.
- Disconnect battery negative cable.
- Raise and support vehicle.
- Remove right post-catalytic converter heated oxygen sensor (HO2S).
- Remove left post-catalytic converter HO2S.
- Remove exhaust crossover pipe assembly to catalytic converter retaining nuts.
- Separate exhaust crossover pipe assembly from catalytic converter assemblies.
- Remove transmission tunnel cross-brace to body retaining bolts.
- Remove transmission tunnel cross-brace.
- Support exhaust system with a suitable jack.
- Remove exhaust crossover pipe assembly to left...
CLICK HERE TO GET FULL ACCESS TO 2005 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Pontiac Grand AM SE 2.2 L4 GAS
To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.
- Raise and support vehicle on a hoist.
- Remove rear tire and wheel assembly.
- Remove wheel drive shaft retaining nut and discard the nut.
- Disconnect wheel speed sensor electrical connector.
- Detach wheel speed sensor wiring harness mounting clip from knuckle.
- Detach rear park brake cable and clev...
CLICK HERE TO GET FULL ACCESS TO 2005 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Pontiac Grand AM GT 3.4 V6 GAS
- Select park/1st gear position in transmission and apply park brake.
- Disconnect battery negative cable.
- Raise and support vehicle.
- Remove right post-catalytic converter heated oxygen sensor (HO2S).
- Remove left post-catalytic converter HO2S.
- Remove exhaust crossover pipe assembly to catalytic converter retaining nuts.
- Separate exhaust crossover pipe assembly from catalytic converter assemblies.
- Remove transmission tunnel cross-brace to body retaining bolts.
- Remove transmission tunnel cross-brace.
- Support exhaust system with a suitable jack.
- Remove exhaust crossover pipe assembly to left...
CLICK HERE TO GET FULL ACCESS TO 2005 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Pontiac Grand AM AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Pontiac Grand AM cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Pontiac Grand AM GT1 3.4 V6 GAS
- Select park/1st gear position in transmission and apply park brake.
- Disconnect battery negative cable.
- Raise and support vehicle.
- Remove right post-catalytic converter heated oxygen sensor (HO2S).
- Remove left post-catalytic converter HO2S.
- Remove exhaust crossover pipe assembly to catalytic converter retaining nuts.
- Separate exhaust crossover pipe assembly from catalytic converter assemblies.
- Remove transmission tunnel cross-brace to body retaining bolts.
- Remove transmission tunnel cross-brace.
- Support exhaust system with a suitable jack.
- Remove exhaust crossover pipe assembly to left...
CLICK HERE TO GET FULL ACCESS TO 2005 Pontiac Grand AM DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Pontiac Grand AM vehicle.
|
| Access the Complete guide! |
