Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2005 Jaguar X-TYPE car and truck
repair procedures including Jaguar engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2005 Jaguar X-TYPE automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2005 Jaguar X-TYPE
- 2005 Jaguar X-TYPE 2.5 V6 GAS, CID:152, Fuel Injection, Aspiration:152
- 2005 Jaguar X-TYPE 3.0 V6 GAS, CID:183, Fuel Injection, Aspiration:183
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jaguar X-TYPE AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jaguar X-TYPE cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2005 Jaguar X-TYPE 3.0 V6 GAS
Front
- Loosen wheel hub nut.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove tie rod end retaining nut.
- Detach tie rod end using ball joint splitter tool No. 204-192 or equivalent .
- Remove subframe reinforcement plate retaining bolts.
- Loosen subframe rear mount retaining bolt.
- Loosen subframe front mount retaining bolt.
- Remove and discard wheel hub nut.
- Remove lower control arm ball joint retaining bolt.
- Reposition lower arm.
- Detach wheel knuckle.
- Detach halfshaft from knuckle using wheel hub puller tool No. 205-491, adapter nuts tool No. 205-491-01 and forcing screw ...
CLICK HERE TO GET FULL ACCESS TO 2005 Jaguar X-TYPE DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jaguar X-TYPE AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jaguar X-TYPE cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2005 Jaguar X-TYPE 2.5 V6 GAS
Front
- Loosen wheel hub nut.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove tie rod end retaining nut.
- Detach tie rod end using ball joint splitter tool No. 204-192 or equivalent .
- Remove subframe reinforcement plate retaining bolts.
- Loosen subframe rear mount retaining bolt.
- Loosen subframe front mount retaining bolt.
- Remove and discard wheel hub nut.
- Remove lower control arm ball joint retaining bolt.
- Reposition lower arm.
- Detach wheel knuckle.
- Detach halfshaft from knuckle using wheel hub puller tool No. 205-491, adapter nuts tool No. 205-491-01 and forcing screw ...
CLICK HERE TO GET FULL ACCESS TO 2005 Jaguar X-TYPE DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jaguar X-TYPE AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jaguar X-TYPE cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 2005 Jaguar X-TYPE 3.0 V6 GAS
Remove
- Raise and support vehicle.
- Remove and discard driveshaft front universal joint retaining bolts.
- Remove and discard driveshaft retaining bolts link washers.
- Detach driveshaft front universal joint.
- Remove and discard driveshaft rear universal joint retaining bolts.
- Remove and discard driveshaft retaining bolts link washers.
- Detach driveshaft rear universal joint.
- Remove and discard center bearing retaining bolts. Support driveshaft front and rear sections.
- Remove drives...
CLICK HERE TO GET FULL ACCESS TO 2005 Jaguar X-TYPE DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Jaguar X-TYPE AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Jaguar X-TYPE cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 2005 Jaguar X-TYPE 2.5 V6 GAS
Remove
- Raise and support vehicle.
- Remove and discard driveshaft front universal joint retaining bolts.
- Remove and discard driveshaft retaining bolts link washers.
- Detach driveshaft front universal joint.
- Remove and discard driveshaft rear universal joint retaining bolts.
- Remove and discard driveshaft retaining bolts link washers.
- Detach driveshaft rear universal joint.
- Remove and discard center bearing retaining bolts. Support driveshaft front and rear sections.
- Remove drives...
CLICK HERE TO GET FULL ACCESS TO 2005 Jaguar X-TYPE DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2005 Jaguar X-TYPE vehicle.
|
| Access the Complete guide! |
