Auto Parts Search
We have info for following modifications of 2005 Chevrolet Colorado
- 2005 Chevrolet Colorado Sport 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2005 Chevrolet Colorado Sport 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2005 Chevrolet Colorado Sport LS 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2005 Chevrolet Colorado Sport LS 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2005 Chevrolet Colorado Z71 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2005 Chevrolet Colorado Z71 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2005 Chevrolet Colorado Z71 LS 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2005 Chevrolet Colorado Z71 LS 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2005 Chevrolet Colorado Z85 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2005 Chevrolet Colorado Z85 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
- 2005 Chevrolet Colorado Z85 LS 2.8 L4 GAS, CC:2770, CID:169, Fuel Injection, Aspiration:169, Engine VIN:, Desg:8
- 2005 Chevrolet Colorado Z85 LS 3.5 L5 GAS, CC:3460, CID:211, Fuel Injection, Aspiration:211, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Colorado AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Colorado cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Chevrolet Colorado Sport 3.5 L5 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel drive shaft nut and washer. Do not reuse wheel drive shaft nut, replace with new.
- Remove steering knuckle assembly.
- Release wheel drive shaft by placing a brass drift against tripod housing. Firmly strike brass drift with a hammer to release drive shaft.
- Remove front wheel drive shaft from vehicle.
- Reverse procedure to install, noting the following:
- A snap or po...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Colorado DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Colorado AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Colorado cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2005 Chevrolet Colorado Z71 LS 3.5 L5 GAS
Front
- Raise and support vehicle.
- Mark the front U-joint to the pinion yoke on the front differential.
- Mark the relationship of the rear U-joint to the transfer case drive flange.
- Remove the retaining nuts and bolts from the drive flange.
- Remove the clamps and retaining bolts from the front drive axle pinion flange.
- Remove the front propeller shaft from the vehicle.
- Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
- Reverse procedure to install, noting the following:
- Torque front propeller shaft to the pinion flang...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Colorado DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Colorado AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Colorado cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2005 Chevrolet Colorado Z85 LS 2.8 L4 GAS
Front
- Raise and support vehicle.
- Mark the front U-joint to the pinion yoke on the front differential.
- Mark the relationship of the rear U-joint to the transfer case drive flange.
- Remove the retaining nuts and bolts from the drive flange.
- Remove the clamps and retaining bolts from the front drive axle pinion flange.
- Remove the front propeller shaft from the vehicle.
- Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
- Reverse procedure to install, noting the following:
- Torque front propeller shaft to the pinion flang...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Colorado DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Colorado AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Colorado cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Chevrolet Colorado Z71 LS 3.5 L5 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel drive shaft nut and washer. Do not reuse wheel drive shaft nut, replace with new.
- Remove steering knuckle assembly.
- Release wheel drive shaft by placing a brass drift against tripod housing. Firmly strike brass drift with a hammer to release drive shaft.
- Remove front wheel drive shaft from vehicle.
- Reverse procedure to install, noting the following:
- A snap or po...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Colorado DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Colorado AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Colorado cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2005 Chevrolet Colorado Z71 3.5 L5 GAS
Front
- Raise and support vehicle.
- Mark the front U-joint to the pinion yoke on the front differential.
- Mark the relationship of the rear U-joint to the transfer case drive flange.
- Remove the retaining nuts and bolts from the drive flange.
- Remove the clamps and retaining bolts from the front drive axle pinion flange.
- Remove the front propeller shaft from the vehicle.
- Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
- Reverse procedure to install, noting the following:
- Torque front propeller shaft to the pinion flang...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Colorado DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2005 Chevrolet Colorado AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2005 Chevrolet Colorado cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2005 Chevrolet Colorado Z85 LS 3.5 L5 GAS
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel drive shaft nut and washer. Do not reuse wheel drive shaft nut, replace with new.
- Remove steering knuckle assembly.
- Release wheel drive shaft by placing a brass drift against tripod housing. Firmly strike brass drift with a hammer to release drive shaft.
- Remove front wheel drive shaft from vehicle.
- Reverse procedure to install, noting the following:
- A snap or po...
CLICK HERE TO GET FULL ACCESS TO 2005 Chevrolet Colorado DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Chevrolet Colorado vehicle. |
Access the Complete guide! |