Auto Parts Search
We have info for following modifications of 2004 Dodge Stratus
- 2004 Dodge Stratus 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
- 2004 Dodge Stratus 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 2004 Dodge Stratus 2.7 V6 FLEX, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:T
- 2004 Dodge Stratus 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:J
- 2004 Dodge Stratus R/T 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:H
- 2004 Dodge Stratus R/T 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Dodge Stratus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Dodge Stratus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Dodge Stratus 2.4 L4 GAS
Non-turbo
Boot sealing is vital to retain special lubricants and to prevent foreign contaminants from entering the CN joint. Mishandling, such as allowing the assemblies to dangle unsupported, or pulling or pushing the ends can cut boots or damage CN joints. During removal and installation procedures, always support both ends of the halfshaft to prevent damage.
The halfshaft, when installed, acts as a bolt and secures the front hub/bearing assembly. If vehicle is to be supported or moved on its wheels with a halfshaft removed, install a PROPER-SIZED BOLT AND NUT through fro...
CLICK HERE TO GET FULL ACCESS TO 2004 Dodge Stratus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Dodge Stratus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Dodge Stratus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Dodge Stratus R/T 3.0 V6 GAS
- Raise and support vehicle, then remove tire and wheel assembly.
- Remove front caliper assembly from front steering knuckle assembly.
- Remove front braking disk (rotor) from hub, by pulling it straight off wheel mounting studs.
- Remove speed sensor cable routing bracket from strut assembly.
- Remove hub and bearing-to-stub axle retaining nut.
- Dislodge inner tripod joint from stub shaft retaining snap ring on transaxle assembly. Inner tripod joint is dislodged from stub shaft retaining snap ring, by inserting a pry bar between transaxle case and inner tripod joint and prying on tripo...
CLICK HERE TO GET FULL ACCESS TO 2004 Dodge Stratus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Dodge Stratus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Dodge Stratus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Dodge Stratus 2.7 V6 FLEX
Non-turbo
Boot sealing is vital to retain special lubricants and to prevent foreign contaminants from entering the CN joint. Mishandling, such as allowing the assemblies to dangle unsupported, or pulling or pushing the ends can cut boots or damage CN joints. During removal and installation procedures, always support both ends of the halfshaft to prevent damage.
The halfshaft, when installed, acts as a bolt and secures the front hub/bearing assembly. If vehicle is to be supported or moved on its wheels with a halfshaft removed, install a PROPER-SIZED BOLT AND NUT through fro...
CLICK HERE TO GET FULL ACCESS TO 2004 Dodge Stratus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Dodge Stratus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Dodge Stratus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Dodge Stratus 2.4 L4 GAS
Non-turbo
Boot sealing is vital to retain special lubricants and to prevent foreign contaminants from entering the CN joint. Mishandling, such as allowing the assemblies to dangle unsupported, or pulling or pushing the ends can cut boots or damage CN joints. During removal and installation procedures, always support both ends of the halfshaft to prevent damage.
The halfshaft, when installed, acts as a bolt and secures the front hub/bearing assembly. If vehicle is to be supported or moved on its wheels with a halfshaft removed, install a PROPER-SIZED BOLT AND NUT through fro...
CLICK HERE TO GET FULL ACCESS TO 2004 Dodge Stratus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Dodge Stratus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Dodge Stratus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Dodge Stratus 2.4 L4 GAS
Non-turbo
Boot sealing is vital to retain special lubricants and to prevent foreign contaminants from entering the CN joint. Mishandling, such as allowing the assemblies to dangle unsupported, or pulling or pushing the ends can cut boots or damage CN joints. During removal and installation procedures, always support both ends of the halfshaft to prevent damage.
The halfshaft, when installed, acts as a bolt and secures the front hub/bearing assembly. If vehicle is to be supported or moved on its wheels with a halfshaft removed, install a PROPER-SIZED BOLT AND NUT through fro...
CLICK HERE TO GET FULL ACCESS TO 2004 Dodge Stratus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Dodge Stratus AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Dodge Stratus cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Dodge Stratus R/T 2.7 V6 GAS
Non-turbo
Boot sealing is vital to retain special lubricants and to prevent foreign contaminants from entering the CN joint. Mishandling, such as allowing the assemblies to dangle unsupported, or pulling or pushing the ends can cut boots or damage CN joints. During removal and installation procedures, always support both ends of the halfshaft to prevent damage.
The halfshaft, when installed, acts as a bolt and secures the front hub/bearing assembly. If vehicle is to be supported or moved on its wheels with a halfshaft removed, install a PROPER-SIZED BOLT AND NUT through fro...
CLICK HERE TO GET FULL ACCESS TO 2004 Dodge Stratus DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2004 Dodge Stratus vehicle. |
Access the Complete guide! |