Auto Parts Search
We have info for following modifications of 2002 Hyundai Elantra
- 2002 Hyundai Elantra GLS 2.0 L4 GAS, CC:1975, Fuel Injection
- 2002 Hyundai Elantra GT 2.0 L4 GAS, CC:1975, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2002 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Hyundai Elantra cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1997-98 -> 1999-2002 -> Accent -> Brake System Bleed -> Component Replacement -> Elantra, Sonata & Tiburon -> Electronic Control Unit (ECU) -> Front Wheel Sensors -> Hydraulic Control Unit (HCU) -> Modulator -> Rear Wheel Sensors
Vehicle: 2002 Hyundai Elantra GT 2.0 L4 GAS
Brake System Bleed
- Bleed normal brake circuit using standard procedure as outlined in "Hydraulic Brake Service."
- Turn ignition switch Off, then connect MUT to diagnosis connector.
- Turn ignition switch to On position, but do not start engine. Multi-use tester should now be On.
- Follow each of the steps listed in Fig. for each bleed screw in order shown:
- Place a clear plastic bleeder tube on screw to be bled.
- Apply light and constant pressure to brake pedal.
- Use multi-use tester to actuate appropriate valve. As valve cycles, fluid and/or air will emerge from bleed screw and brake pedal will...
CLICK HERE TO GET FULL ACCESS TO 2002 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Hyundai Elantra cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting -> Preliminary Inspection -> System Diagnosis Step Indicator Check
Vehicle: 2002 Hyundai Elantra GLS 2.0 L4 GAS
Preliminary Inspection
Start engine and drive at a speed of 3-6 mph, then verify that the modulator is operating by listening for motor pump hum and solenoid clicking for one or two seconds. Procedure should be performed within first three minutes after start up. Solenoid valve and motor pum...
CLICK HERE TO GET FULL ACCESS TO 2002 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Hyundai Elantra cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service
Vehicle: 2002 Hyundai Elantra GT 2.0 L4 GAS
The power brake unit is no...
CLICK HERE TO GET FULL ACCESS TO 2002 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Hyundai Elantra cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> ACCENT -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> ELANTRA, SONATA & TIBURON -> SANTA FE, XG 300 & XG 350 -> System Testing -> Testing Using Self-Test Mode -> Wiring Diagrams
Vehicle: 2002 Hyundai Elantra GT 2.0 L4 GAS
Accessing Diagnostic Trouble Codes
- Ensure battery voltage is between 9 and 16 volts.
- Check warning light by turning ignition switch On and verifying that ABS warning light illuminates for one second.
- Use Hyundai Multi-Use Tester (MUT), or equivalent, scan tool, to inspect system as follows:
- Turn ignition switch to Off position, then connect multi-use tester to diagnostic connector.
- Turn ignition switch to On position, then use multi-use tester to check self-diagnosis trouble codes.
Diagnostic Trouble Code Interpretation
For a description of trouble codes which can be read using the...
[[table data]] [[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 2002 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Hyundai Elantra cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> 1997-98 -> 1999-2002 -> Accent -> Elantra & Tiburon -> Elantra, Sonata & Tiburon -> Front -> Rear -> Santa Fe -> Sonata -> XG 300 & XG 350
Vehicle: 2002 Hyundai Elantra GLS 2.0 L4 GAS
Front
Accent
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove lower bolt and caliper assembly, Fig. . Position assembly aside using suitable wire.
- Remove brake pads and shim.
- Bottom piston in caliper using a suitable tool.
- Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
Elantra, Sonata & Tiburon
- Raise and support vehicle, then remove wheel/tire assembly.
- Remove two mounting bolts attaching caliper to torque plate, Fig. .
- Remove brake caliper assembly, then position aside using suitable wire.
- Remove brake pads.
- Install pad c...
CLICK HERE TO GET FULL ACCESS TO 2002 Hyundai Elantra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Hyundai Elantra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Hyundai Elantra cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit, Replace
Vehicle: 2002 Hyundai Elantra GT 2.0 L4 GAS
- Remove master cylinder as outlined under "Component Replacement" in "Hydraulic Brake System."
- Disconnect vacuum hose.
- From inside vehicle, separate bra...
CLICK HERE TO GET FULL ACCESS TO 2002 Hyundai Elantra BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2002 Hyundai Elantra vehicle. |
Access the Complete guide! |