Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Volkswagen Passat car and truck
repair procedures including Volkswagen engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Volkswagen Passat automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 Volkswagen Passat
- 2001 Volkswagen Passat 1.8 L4 GAS, CC:1781, Fuel Injection
- 2001 Volkswagen Passat 2.8 V6 GAS, CC:2771, Fuel Injection, Engine VIN:, Desg:H
- 2001 Volkswagen Passat 1.8 L4 GAS, CC:1781, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2001 Volkswagen Passat AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Volkswagen Passat cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Bosch 5 -> Bosch 5.3 -> Brake System Bleed -> Cabrio, Golf, GTI, Jetta & New Beetle -> Coding Control Module -> Component Replacement -> Control Module -> EuroVan -> Hydraulic Modulator -> ITT Mark 20 IE -> Passat -> Teves Type 04 -> Teves Type 20
Vehicle: 2001 Volkswagen Passat 1.8 L4 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems" for bleeding procedure.
Component Replacement
Bosch 5.3, ITT Mark 20 and Teves model 20 ABS control modules are coded to the vehicle. Replacement control modules must be coded after installation. Refer to "Coding Control Module" for procedures.
Prior to servicing the ABS system, always turn the ignition off.
The ABS control unit must never be exposed to temperatures greater than 185°F for more than two hours, or 203°F for even short time periods. The ABS control unit must be unplugged if an electric welder is to be used on the vehicle.
...
CLICK HERE TO GET FULL ACCESS TO 2001 Volkswagen Passat BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Volkswagen Passat AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Volkswagen Passat cars and light trucks from 1990+.
Disc Brakes -> Single Piston Rear Disc Brake
Vehicle: 2001 Volkswagen Passat 1.8 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2001 Volkswagen Passat BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Volkswagen Passat AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Volkswagen Passat cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Shoes, Replace -> Wheel Cylinder Overhaul
Vehicle: 2001 Volkswagen Passat 1.8 L4 GAS
Shoes, Replace
Failure to follow outlined procedures may lead to a reduction in parking brake efficiency.
- Remove one wheel bolt, then push self adjusting wedge upwards with a suitable screwdriver through wheel bolt hole to back off brake shoes, Fig. .
- Install wheel bolt and tighten to specifications, then remove grease cap with puller tool No. VW 637/2, or equivalent.
- Remove cotter pin and axle nut, then pull off brake drum.
- Remove spring retainer by pressing it against spring and turning 1/4 turn.
- Disconnect brake shoes from anchor pins, then remove return spring.
- Disconnect parking br...
CLICK HERE TO GET FULL ACCESS TO 2001 Volkswagen Passat BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Volkswagen Passat AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Volkswagen Passat cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Bosch 5 -> Bosch 5.3 -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> ITT Mark 20 IE -> Testing -> Teves Type 04 -> Teves Type 20
Vehicle: 2001 Volkswagen Passat 1.8 L4 GAS
Accessing Diagnostic Trouble Codes
The ABS control unit has a permanent fault memory. If fault conditions occur at electrically monitored sensors or components they are stored in memory.
Faults are stored with varying priorities. Solenoid faults have the highest priority and are displayed first. Faults which occur occasionally or sporadic faults have the lowest priority and are displayed last.
Do not drive vehicle with VAG 1551 or equivalent scan tool connected.
- Connect a suitable scan tool to the Diagnostic Link Connector (DLC). Refer to Figs. through , for DLC locations and t...
CLICK HERE TO GET FULL ACCESS TO 2001 Volkswagen Passat BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Volkswagen Passat AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Volkswagen Passat cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder
Vehicle: 2001 Volkswagen Passat 1.8 L4 GAS
Master Cylinder
- Siphon brake fluid from reservoir, then disconnect brake lines from master cylinder and electrical connectors from brake lamp switches.
- Remove master cylinder to firewall or brake booster attaching nuts, then the master cylinder and se...
CLICK HERE TO GET FULL ACCESS TO 2001 Volkswagen Passat BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Volkswagen Passat AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Volkswagen Passat cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Bosch 5 -> Bosch 5.3 -> Brake System Bleed -> Cabrio, Golf, GTI, Jetta & New Beetle -> Coding Control Module -> Component Replacement -> Control Module -> EuroVan -> Hydraulic Modulator -> ITT Mark 20 IE -> Passat -> Teves Type 04 -> Teves Type 20
Vehicle: 2001 Volkswagen Passat 2.8 V6 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems" for bleeding procedure.
Component Replacement
Bosch 5.3, ITT Mark 20 and Teves model 20 ABS control modules are coded to the vehicle. Replacement control modules must be coded after installation. Refer to "Coding Control Module" for procedures.
Prior to servicing the ABS system, always turn the ignition off.
The ABS control unit must never be exposed to temperatures greater than 185°F for more than two hours, or 203°F for even short time periods. The ABS control unit must be unplugged if an electric welder is to be used on the vehicle.
...
CLICK HERE TO GET FULL ACCESS TO 2001 Volkswagen Passat BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2001 Volkswagen Passat vehicle.
|
| Access the Complete guide! |
