Auto Parts Search
We have info for following modifications of 2000 Toyota Solara
- 2000 Toyota Solara 3.0 V6 GAS, CC:2995, Fuel Injection
- 2000 Toyota Solara 2.2 L4 GAS, CC:2164, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Toyota Solara AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Toyota Solara cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 1999-2003 Camry Solara
Vehicle: 2000 Toyota Solara 2.2 L4 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch in On position.
- On models equipped with Nippondenso systems,connect jumper tool No. 09843-18040, or equivalent, to terminals TC and E1 of diagnos...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Solara MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Toyota Solara AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Toyota Solara cars and light trucks sold in the U.S. from 1990+.
Toyota -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 2000 Toyota Solara 3.0 V6 GAS
This lamp will be illuminated when automatic transmission or transfer case fluid temperature exceeds 302°F. If the lamp lights, allow vehicle to operate at idle speed until fluid temperature falls below 248°F; t...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Solara MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Toyota Solara AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Toyota Solara cars and light trucks sold in the U.S. from 1990+.
Toyota -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2000 Toyota Solara 2.2 L4 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
The MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a fault has been detected by the diagnostic system and has logged a diagnostic trouble code. If the fault does not occur again within three trips, the lamp will go out but a diagnostic tro...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Solara MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Toyota Solara AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Toyota Solara cars and light trucks sold in the U.S. from 1990+.
Toyota -> Air Bag Warning Lamp -> 1999-2001 Camry Solara
Vehicle: 2000 Toyota Solara 3.0 V6 GAS
The air bag system warning lamp is used to warn of a system fault. The lamp will light during engine start-up, but should go out when the self-diagnostic system determines that no faults are present. If the lamp remains lit, a fault in the air bag system is indicated. The air bag system must be diagnosed and repaired, then the following procedures can be used to reset the warning lamp.
- Connect service wires to check c...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Solara MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Toyota Solara AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Toyota Solara cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 1999-2003 Camry Solara
Vehicle: 2000 Toyota Solara 3.0 V6 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch in On position.
- On models equipped with Nippondenso systems,connect jumper tool No. 09843-18040, or equivalent, to terminals TC and E1 of diagnos...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Solara MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Toyota Solara AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Toyota Solara cars and light trucks sold in the U.S. from 1990+.
Toyota -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 2000 Toyota Solara 3.0 V6 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
The MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a fault has been detected by the diagnostic system and has logged a diagnostic trouble code. If the fault does not occur again within three trips, the lamp will go out but a diagnostic tro...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Solara MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Toyota Solara vehicle. |
Access the Complete guide! |