Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Toyota Celica car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Toyota Celica automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Toyota Celica
- 2000 Toyota Celica 1.8 L4 GAS, CC:1795, Fuel Injection
- 2000 Toyota Celica 1.8 L4 GAS, CC:1794, Fuel Injection, Engine VIN:, Desg:R
BRAKE SERVICE PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> 2WD -> 4Runner -> Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna -> Echo & RAV4 -> Land Cruiser -> Overhaul -> Replace -> Sequoia & Tundra -> Supra -> T100 -> Tacoma -> Tercel
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna
Replace
- Raise and support vehicle and remove front wheel.
- Remove union bolt and disconnect brake hose. Use suitable container to catch brake fluid.
- Remove caliper, Figs. through .
- Remove anti-squeal shims and brake pad wear indicator plates.
- Remove support plates.
- Reverse procedure to install.
Overhaul
- Remove caliper.
- Remove the following parts:
- Caliper slide bushings.
- Dust boots.
- Collars.
- Using screwdriver, remove caliper boot set ring and boot.
- Place suitable rag between caliper and piston and using compressed air, remov...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Brake Pad Service -> Avalon & Supra -> Camry & Camry Solara -> Celica & MR2 -> Highlander -> Land Cruiser & Sequoia
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
Avalon & Supra
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove caliper attaching bolts, then the caliper, Figs. through . Do not allow caliper to hang unsupported or damage to the brake hose may occur.
- Remove pads and anti-squeal shim(s).
- Remove anti-rattle springs, pad guide plates and support plate.
- Reverse procedure to install.
Camry & Camry Solara
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove caliper attaching bolts, then the caliper, Figs. through . Do not allow caliper to hang unsupported or damage to the brake ...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Except Land Cruiser & 4Runner -> Except Sienna -> Land Cruiser & 4Runner -> Master Cylinder -> Models w/Load Sensing Proportioning Valve (LSPV) -> Models w/Proportioning & Bypass Valve (P-BV) -> Proportioning Valve -> Sienna -> Wheel Cylinders
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
Master Cylinder
Except Sienna
- Remove brake fluid with syringe.
- On RAV4 models, remove air cleaner cover with air cleaner hose.
- On all models, label and disconnect brake lines using line wrench 09751-36011, 09023-00100, or equivalent. Cap brake lines from master cylinder.
- Disconnect wire connector from brake pressure switch and then disconnect level warning switch connector, if equipped.
- Remove master cylinder to brake unit attaching nuts, then remove master cylinder, wire clamp, gasket and 3-way union, as needed.
- Reverse procedure to install. Bleed brake system.
Sienna
- Remove air c...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Disc Brake Specifications
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
Refer to the disc brake specifications under "Rear ... "
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Precautions -> Audio Coded Anti-Theft System
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
Audio Coded Anti-Theft System
Some models are equipped with an audio coded anti-theft system that will disable the radio when the battery cable is disconnected. The system can be identified by the "ANTI-THEFT SYSTEM" on the cassette tape lid. Obtain 3 digit customer code for input. Reset system after service as follows:
- Obtain 3 digit audio anti-theft code.
- Depress 1 (PROG) while depressing righthand side of TUNE SEEK button,- - - will appear in tape operation display.
- To enter the first digit, depress 1 (PROG) button repeatedly until the number of times depressed equals the first digit b...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Toyota Celica vehicle.
|
| Access the Complete guide! |
