Auto Parts Search
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Mazda Miata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Mazda Miata cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2000 Mazda Miata 1.8 L4 GAS
- Place transmission in neutral, and raise and support vehicle.
- Remove crossmember bracket.
- On models equipped with 16 inch wheel, remove rear crossbar
- Remove presilencer.
- Mark rear companion flange to driveline.
- Mark slip yoke to transmission output shaft.
- Remove bolts and disconne...
CLICK HERE TO GET FULL ACCESS TO 2000 Mazda Miata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Mazda Miata AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Mazda Miata cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Mazda Miata 1.8 L4 GAS
Front
Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if pulled by mistake. Before performing the following procedures, disconnect the ABS wheel speed sensor connector (axle side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing vehicle.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transaxle fluid into suitable container.
- Disconnect ABS wheel speed se...
CLICK HERE TO GET FULL ACCESS TO 2000 Mazda Miata DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Mazda Miata vehicle. |
Access the Complete guide! |