Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 GMC Yukon car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 GMC Yukon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 GMC Yukon
- 2000 GMC Yukon Denali 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 2000 GMC Yukon SLT 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:V
- 2000 GMC Yukon SLT 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:T
BRAKE SERVICE PROCEDURES FOR 2000 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Yukon cars and light trucks from 1990+.
Anti-lock Brakes -> Kelsey-Hayes -> Description
Vehicle: 2000 GMC Yukon SLT 4.8 V8 GAS
This system is used on all models except Montana, Silhouette, Tracker, Trans Sport and Venture. On 2000 S & T Series , four door utility vehicles can be equipped with either a 310 or 325 ABS system. Pickups and two-door utility vehicles are equipped with 310 ABS systems. While both systems are functionally the same, the 310 differs in size and appearance from the 325. It is designed to reduce the occurrence of wheel lock-up during severe braking conditions. To accomplish this function, the system regulates hydraulic brake line pressure by using an Electro-Hydraulic Control Unit (EHC...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Yukon cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Power Brake Unit Service
Vehicle: 2000 GMC Yukon SLT 4.8 V8 GAS
The power brake unit is n...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Yukon cars and light trucks from 1990+.
Anti-lock Brakes -> Kelsey-Hayes -> Precautions -> Battery Ground Cable -> Delco LOC II -> General Service Precautions -> Radio Security System -> Theftlock
Vehicle: 2000 GMC Yukon Denali 5.7 V8 GAS
Battery Ground Cable
Prior to service disconnect battery ground cable and isolate as required.
Radio Security System
Theftlock
If the Theftlock system is active when battery power is interrupted, the customers security code must be entered to restore proper function of the radio. To unlock a secured radio after power loss, proceed as follows:
- "LOC" appears with ignition in On position.
- Press "NM" and "000" will appear on display.
- Press "NM" again to make last two digits agree with security code.
- Press "HR" to make first 1 or 2 digits agree with security code.
- Press "AM-FM" to select code entered. "SEC" wi...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Yukon cars and light trucks from 1990+.
Drum Brakes -> Precautions
Vehicle: 2000 GMC Yukon SLT 5.3 V8 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations, the amount of asbestos dust from brake lining wear is at a low level because of a chemical breakdown during use and a few precautions will minimize exposure. Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent ...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Yukon cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Brake Pad Service -> Installation -> Removal
Vehicle: 2000 GMC Yukon Denali 5.7 V8 GAS
Removal
- Remove caliper as outlined under "Caliper Service."
- Remove inboard pad with retainer spring.
- Remove outboard pad and position caliper on front suspension so brake hose will not support weight of caliper.
- Remove two sleeves from inboard ears of caliper.
- Remove four rubber bushings from grooves in each of caliper ears.
Installation
- Lubricate new sleeves, rubber bushings, bushing grooves and mounting bolt ends with lubricant part No. 19010909, or equivalent.
- Install new bushings and sleeves in caliper e...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Yukon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Hydraulic System Flush -> Manual Bleed -> Master Cylinder Bleed -> Parking Brake Bleed -> Pressure Bleed
Vehicle: 2000 GMC Yukon SLT 4.8 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid. Ensure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in the bore, it must be bled first. To bleed master cylinder, proceed as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect ...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Yukon BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 GMC Yukon vehicle.
|
| Access the Complete guide! |
