Auto Parts Search
We have info for following modifications of 2000 Ford Ranger
- 2000 Ford Ranger 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:X
- 2000 Ford Ranger L ELECTRIC, Engine VIN:, Desg:7
- 2000 Ford Ranger 2.5 L4 GAS, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:C
- 2000 Ford Ranger L ELECTRIC, Engine VIN:, Desg:1
- 2000 Ford Ranger 3.0 V6 FLEX, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:V
A/C & HEATER SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+
Computer Relearn Procedures -> Ford Motor Co. -> 1999-2002 -> 2003-04 -> Automatic Data Transfer -> Except 1999-2002 -> Manual Data Entry -> Powertrain Control Module (PCM)
Vehicle: 2000 Ford Ranger L ELECTRIC
Powertrain Control Module (PCM)
Except 1999-2002
Disconnect negative battery cable for a minimum of five minutes. After clearing memory, it is required to drive vehicle a minimum of 10 miles to allow PCM time to relearn operating strategy.
1999-2002
Automatic Data Transfer
- Prior to removing old PCM, connect a suitably programmed scan tool to Data Link Connector (DLC).
- Follow scan tool manufacturers' instructions to download data from old PCM.
- Install new PCM and connect scan tool to DLC.
- Follow scan tool manufactur...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> A/C Compressor Clutch Cycle Switch, Replace -> Econoline, Excursion, Explorer, F-Series & Mountaineer, Villager & Windstar -> Expedition & Navigator -> Ranger
Vehicle: 2000 Ford Ranger 3.0 V6 FLEX
Econoline, Excursion, Explorer, F-Series & Mountaineer, Villager & Windstar
The A/C cycling switch is mounted on a Schrader valve type fitting on top of the suction accumulator/drier. It is not necessary to discharge the refrigerant system to remove the A/C cycling switch.
- Disconnect A/C cycling switch connector.
- Remove A/C clutch cycling switch from accumulator/drier.
- Reverse procedure to install.
Expedition & Navigator
- On 1999-2000 models, remove junction block splash shield, connector and screws, then th...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Accumulator/Drier, Replace -> 1998 -> 1999-2000 -> 1999-2000 w/4.2L Engine -> 1999-2000 w/4.6L & 5.4L Engines -> Auxiliary A/C -> Econoline -> Excursion -> Expedition & Navigator -> Explorer & Mountaineer -> F-Series -> Ranger -> Standard A/C -> Villager -> Windstar
Vehicle: 2000 Ford Ranger 3.0 V6 FLEX
The accumulator/drier must be replaced any time the system has been left open for more than 24 hours with the system completely discharged, there is evidence of moisture in the system, the system is badly contaminated, there is more than five ounces of compressor oil in it, or the accumulator/drier is restricted, plugged or perforated. Replacement of a refrigerant line or a major component (condenser, evaporator or seized compressor) requires replacement of the accumulator/drier. The receiver/drier does not necessarily need to be replaced every time there is a los...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+
Component Replacement & Adjustment -> Light Duty Trucks & Vans -> Electric Actuators, Replace -> Econoline -> Expedition & Navigator -> Explorer & Mountaineer -> F-Series -> Panel/Floor/Defrost -> Ranger -> Recirculate/Fresh -> Temperature Blend -> Temperature Blend/Panel Bypass -> Villager -> Windstar
Vehicle: 2000 Ford Ranger L ELECTRIC
Econoline
- Remove instrument panel finish panel.
- Disconnect electronic door actuator motor connector.
- Remove actuator mounting screws, then the A/C electronic door actuator motor, Fig. .
- Reverse procedure to install.
Expedition & Navigator
- Remove floor duct panel.
- Remove right side instrument panel brace.
- Remove left side instrument panel lower nut and position brace aside.
- Remove floor duct, then the electronic actuator.
- Reverse procedure to install.
Explorer & Mountaineer
- Remove instr...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+
Electrical Symbol & Wire Color Code Identification -> Wire Color Code Identification -> Domestic Vehicles
Vehicle: 2000 Ford Ranger 3.0 V6 FLEX
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2000 Ford Ranger AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2000 Ford Ranger cars and light trucks from 1990+
Electrical Symbol & Wire Color Code Identification -> Wire Color Code Identification -> Domestic Vehicles
Vehicle: 2000 Ford Ranger L ELECTRIC
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Ranger A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Ford Ranger vehicle. |
Access the Complete guide! |