Auto Parts Search
We have info for following modifications of 1999 Subaru Legacy
- 1999 Subaru Legacy 2.2 H4 GAS, CC:2212, Fuel Injection, Engine VIN:, Desg:4
- 1999 Subaru Legacy 2.5 H4 GAS, CC:2458, Fuel Injection
- 1999 Subaru Legacy Outback 2.5 H4 GAS, CC:2458, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1999 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Subaru Legacy cars and light trucks from 1990+.
Anti-lock Brakes -> Legacy & Outback -> Diagnosis & Testing -> ABS -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Component Testing -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Less Select Monitor -> Preliminary Inspection -> VDC -> Wiring Diagrams -> With Select monitor
Vehicle: 1999 Subaru Legacy Outback 2.5 H4 GAS
Preliminary Inspection
- Ensure battery voltage is 12 volts or more and specific gravity is above 1.260.
- Inspect brake fluid level and for brake fluid leakage.
- Inspect brake drag.
- Inspect brake pads and rotors.
- Inspect tires for excessive wear and proper inflation.
Accessing Diagnostic Trouble Codes
Less Select Monitor
When on board diagnosis of the ABS/VDC control module detects a problem, the information (up to a maximum of three) will be stored in the EEPROM as a diagnostic trouble code (DTC). When there are more than three, the most recent three will be stored. Stored codes will s...
[[table data]] [[table data]] [[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 1999 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Subaru Legacy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1999 Subaru Legacy Outback 2.5 H4 GAS
- Ensure there are no fluid leaks from joints or connections.
- When bleeding brakes, bleed brakes connected to the secondary chamber of the master cylinder, then bleed brakes connected to the primary chamber of the master cylinder.
- Fit one end of vinyl tube into air bleeder and put the other end into a brake fluid containe...
CLICK HERE TO GET FULL ACCESS TO 1999 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Subaru Legacy cars and light trucks from 1990+.
Anti-lock Brakes -> Legacy & Outback -> Description
Vehicle: 1999 Subaru Legacy Outback 2.5 H4 GAS
The Anti-lock Brake System (ABS) electrically controls brake fluid pressure to prevent wheel lock during braking on slippery road surfaces, which improves directional steering stability as well as shortening the braking distance.
If ABS becomes inoperative, the fail-safe system activates to ensure it acts as a conventional brake system. The warning light also comes on to indicate that the ABS is malfunctioning.
Vehicle Dynamics Control (VDC) system is a dri...
CLICK HERE TO GET FULL ACCESS TO 1999 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Subaru Legacy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Troubleshooting
Vehicle: 1999 Subaru Legacy 2.5 H4 GAS
Refer to Fig. , when trou...
CLICK HERE TO GET FULL ACCESS TO 1999 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Subaru Legacy cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing
Vehicle: 1999 Subaru Legacy Outback 2.5 H4 GAS
Perform this procedure with the parking brakes applied.
- Start engine, then stop after one or two minutes of running time.
- Depress brake pedal several times with normal force.
- If pedal travel decreases the more times the brake pedal is depressed, the ...
CLICK HERE TO GET FULL ACCESS TO 1999 Subaru Legacy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Subaru Legacy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Subaru Legacy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Master Cylinder
Vehicle: 1999 Subaru Legacy 2.5 H4 GAS
Master Cylinder
- Remove master cylinder from vehicle.
- Remove cylinder pin, Fig. .
- Push piston inward, then remove snap ring.
- Apply pressure to piston assembly while Inserting a small screwdriver into window of piston retainer and raise piston retainer latch, Fig. .
- Remove primary and secondary piston assemblies. Do not disassemble pistons. if disassembled, the spring settings will change.
- Inspect master cylinder inside diameter to piston clearance, Service limit is not to exceed 0.043 inch.
- Clean all parts with clean brake fluid, do...
CLICK HERE TO GET FULL ACCESS TO 1999 Subaru Legacy BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1999 Subaru Legacy vehicle. |
Access the Complete guide! |